How many quarts of oil does a 2014 Acura MDX take?
The 2014 Acura MDX with the 3.5-liter V6 typically requires about 5.7 quarts of engine oil when performing a full oil change with a new filter. If the filter is not replaced, the total is around 5.0 quarts. Always verify the exact amount in the owner’s manual and confirm the level with the dipstick after filling.
Engine and capacity fundamentals
The MDX uses a 3.5L V6 (engine code J35A) and specifies 0W-20 synthetic oil in most markets. The official capacity with the filter installed is 5.7 quarts (roughly 5.4 liters), which is the expected amount to reach the recommended level during a standard oil change.
Practical maintenance guidance
When planning an oil service, prepare for about 5.7 quarts to ensure you reach the proper level after replacing the filter. Use a genuine Acura oil filter and the recommended 0W-20 viscosity. After adding oil, start the engine, check for leaks, and recheck the level with the dipstick.
Notes on variation and verification
Actual capacity can vary slightly due to regional specifications, filter type, or other factors. Always consult the owner’s manual for your VIN and region, and verify final oil level with the dipstick to avoid overfilling.
Summary
For a 2014 Acura MDX with the 3.5L V6, plan for about 5.7 quarts of oil during a standard oil change with a new filter. Use 0W-20 synthetic oil and confirm the final level with the dipstick. If you skip replacing the filter, the total is closer to 5.0 quarts.
How much oil does a 3.5 L MDX take?
The oil capacity for an Acura MDX with a 3.5L V6 engine is 5.7 quarts when changing the oil filter. It's crucial to always check the dipstick after refilling and consult your owner's manual for the most accurate information for your specific model year.
- For most 3.5L V6 engines: The capacity is 5.7 quarts when you change the oil filter.
- For newer models: Some sources indicate a capacity of around 5.5 quarts.
- Always verify: After adding the oil, always check the dipstick to ensure the level is correct.
- Consult your owner's manual: This is the most definitive source of information for your specific vehicle.
How many quarts of oil does a 3.6 L V6 take?
A 3.6L V6 engine typically takes between 5 and 6 quarts of oil, but the exact amount varies by vehicle model, so you must check your owner's manual or the oil fill cap for the precise capacity. For example, some models like a 2013 Jeep JK require 6 quarts, while newer models like a 2020 Jeep Wrangler or 2018+ Jeep Wrangler JL may only take 5 quarts.
Here are some general guidelines:
- Check your owner's manual: This is the most reliable source for your specific vehicle.
- Look at the oil fill cap: It may have the required viscosity and capacity printed on it.
- Consider the model year: Newer vehicles, especially certain Jeep models, have different oil capacities than older ones.
- Change the oil filter: Always include an oil filter change, as this is part of the full oil capacity.
- After refilling, check the level: After you've filled the engine with oil, use the dipstick to check the oil level and add more if needed to reach the "full" line.
How much oil does a 3.7 L Acura MDX take?
4.5 quarts (with filter).
How many quarts of oil does a 2014 Acura MDX use?
5.7 quarts
2014 Acura MDX Specifications
| CAPACITIES | |
|---|---|
| Cooling System (total) | 2.3gallons (8.2 liters) |
| Fuel tank | 19.5 gallons (73.8 liters) |
| Engine Oil | Change with oil filter – 5.7 quarts (5.4 liters) |
