How many quarts of transmission fluid does a 2004 Chevy Impala take?
The 2004 Chevy Impala requires 3.5 quarts of transmission fluid to fill the transmission to the proper level. This is the standard amount needed for this specific vehicle model and year.
Detailed Explanation
The 2004 Chevy Impala is equipped with a 4-speed automatic transmission. According to the vehicle's owner's manual and service information, the transmission fluid capacity for this model is 3.5 quarts. This is the amount of fluid needed to fill the transmission from empty to the proper level, as indicated by the transmission dipstick.
It's important to use the correct type of transmission fluid recommended by Chevrolet for the 2004 Impala. The owner's manual specifies the use of Dexron-III or Mercon automatic transmission fluid. Using the wrong fluid can potentially damage the transmission over time.
Checking and Changing Transmission Fluid
To check the transmission fluid level, the engine should be running and the transmission in Park. The fluid level should be checked with the vehicle on a level surface. If the level is low, add fluid in small increments until it reaches the full mark on the dipstick.
Chevrolet recommends changing the transmission fluid in the 2004 Impala every 30,000 miles or 24 months, whichever comes first. This helps maintain the proper viscosity and condition of the fluid for optimal transmission performance and longevity.
Following the manufacturer's recommendations for transmission fluid capacity and maintenance is crucial for ensuring the reliable operation of the 2004 Chevy Impala's transmission.
How many quarts does a 3.6 impala take?
6 quarts
6 quarts (with filter). After refill check oil level.
How many quarts of transmission fluid for a 2004 Chevy Impala?
Automatic Transmission Fluid
Capacity: 4 speed 4T65-E Total Fill 13.4 quarts.
How many quarts are needed for a transmission fluid change?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
How many quarts of transmission fluid does a Chevy Impala take?
6.3 quarts
Automatic Transmission Fluid
Capacity: 6.3 quarts Initial Fill.
How much fluid does a Chevy transmission hold?
10L80: 11.5 to 12 quarts.
How much transmission fluid does a 2004 Chevy Impala take?
Automatic Transmission Fluid
Capacity: 7.4 quarts Initial Fill.
Is it better to flush or change transmission fluid?
Flush — Which to Choose? It's been said that a transmission flush is more effective than a change because: With a flush, all the old fluid is removed by a flush machine and replaced with new fluid, allowing for optimal transmission performance.
How many quarts does it take to fill an empty transmission?
Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car's manufacture and other criteria.
How many quarts does a 3.6 L V6 take?
5.3 quarts
Capacity: 5.3 quarts Initial Fill.
How many gallons does a 2004 Chevy Impala hold?
17 gal
