Loading

How much are Acura TLX brakes?

Typical TLX brake costs (as of 2024–2025) run roughly: pads per axle $60–$180; rotors per axle $80–$260; labor per hour commonly $80–$150; a full four-corner brake job installed by a shop often lands in the $600–$1,200 range, depending on parts and region.


Prices vary by year and trim, with TLX Type S and other performance variants generally carrying higher parts costs due to larger rotors and calipers. This article outlines current pricing, what drives the cost, and how to budget for maintenance or replacement of TLX brakes.


Brake pads: price ranges and options


Prices vary by material and brand, and the TLX uses four pads per axle. Here are typical price ranges for front and rear pads, including OEM and aftermarket choices.



  • OEM front brake pads (per axle, two pads): typically $120–$180

  • Aftermarket standard pads (per axle, two pads): typically $60–$120

  • Ceramic or high-performance pads (per axle, two pads): typically $120–$200

  • Rear brake pads (per axle, two pads): typically $60–$150 (aftermarket); OEM rear pads often $90–$150


Overall, pad prices vary with material and brand. Ceramic and performance pads cost more than basic metallics, and OEM pads tend to sit at the higher end of the aftermarket range.


Rotors: price ranges and options


Rotors are typically replaced per axle when you swap pads, and costs vary by material and whether you choose OEM or aftermarket rotors.



  • OEM front rotors (per rotor): typically $60–$120

  • Aftermarket front rotors (per rotor): typically $40–$90

  • Premium or drilled/slotted rotors (per rotor): typically $100–$250

  • Rear rotors (per rotor): typically $40–$100 (aftermarket); OEM rear rotors often $60–$120


Note that rotors labeled as premium, drilled, or slotted can substantially raise the sticker price but may offer improved heat management for spirited driving. Always pair rotors with compatible pads and sensors when applicable.


Labor and total job estimates


Labor costs depend on location and shop. Here are typical ranges you might encounter in the United States.


In general, a pad-only replacement per axle may take roughly 0.8–1.5 hours, while rotor replacement or a full pad-and-rotor job can run 1.5–3.0 hours per axle. At common shop rates of $80–$150 per hour, this translates to roughly $70–$225 per axle for labor on pads, and $120–$450 per axle for labor when including rotors. A full four-corner job (pads and rotors on both front and rear) commonly lands around $600–$1,200, depending on parts and regional labor rates. Brake-fluid flush or sensor-related work can add to the bill.


TLX Type S: how the math changes


TLX Type S models use larger brakes and may employ higher-performance pads and rotors. This typically means higher part costs, especially for rotors and calipers, compared with base TLX models. Labor times may also be similar or slightly higher if the hardware is larger or more complex to service. If you’re shopping for Type S components, expect the upper end of the typical ranges listed above.


Where to buy and how to save


To maximize value without sacrificing safety, consider the following approach. Before buying, gather quotes from multiple sources and compare OEM versus aftermarket options. The TLX’s braking system is common enough that many parts are widely available from auto parts chains, online retailers, and the dealer network.



  • Shop around for pads and rotors online and at local parts stores—prices can vary significantly.

  • Consider aftermarket pads and rotors that are confirmed compatible with TLX ABS and sensor setups for a balance of cost and reliability.

  • Ask for a combined “pads and rotors” per-axle price or a four-corner kit to maximize savings.

  • Factor in potential extras like brake-fluid flush, wear-sensor replacements, or hardware kits when budgeting.


When in doubt, request a written estimate that itemizes parts, labor, and any additional services so you can compare apples to apples.


Summary


Brake costs for the Acura TLX vary with year, trim, and parts quality. A rough baseline as of 2024–2025 places pads per axle at $60–$180, rotors per axle at $80–$260, plus labor that typically runs $80–$150 per hour. A full four-corner job widely falls in the $600–$1,200 range, with OEM parts tending toward the upper end and aftermarket options offering more budget-friendly choices. Performance variants like the TLX Type S can push costs higher due to larger parts. Always compare quotes and consider the total value, including parts quality and labor, when planning a brake service.

How long do Acura TLX brakes last?


Acura TLX Service Intervals
Neglecting to do so will eventually lead to a dead battery. Brake Fluid Replacements – Flush and replace brake fluid about every two years. Brake Pad Replacements – Plan to have your brakes inspected and brake pads replaced every 30,000 and 60,000 miles.



How much will 4 brake pads cost?


How Much Is It To Replace Brake Pads? On average, it costs $100-$300 per axle to replace the brake pads in a vehicle. In other words, replacing either the front or rear brake pads would be $100-$300, and replacing both the front and rear brake pads would be $200-$600.



How much are the brake pads for Acura TLX?


2021 Acura TLX Front Brake Pads Price
Generally the cost for parts will range from $100-$200 per axle and labor can cost anywhere between $80 - $100.



How much are Acura brakes?


Depending on the type of brake pads you get, replacing the brake pads for your Acura RDX can cost between $200 - $800. However, you don't have to replace both axles at once, saving you money if you decide to replace only the front or rear axle brake pads.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.