How much are brakes and rotors for all 4?
Most cars cost roughly $300–$900 in parts and $160–$300 in labor to replace pads and rotors on all four wheels, depending on vehicle and quality. This ballpark reflects typical pricing for common passenger cars in 2024–2025.
To understand the question in more detail, replacing brakes on all four corners means two sets of brake pads (one for the front axle and one for the rear) and four rotors, plus the labor to install and bed in the new parts. Prices vary by vehicle type, rotor design (solid, vented, drilled/slotted), and whether you choose economy or premium parts. The guide below outlines typical ranges and scenario-based totals so you can budget more accurately.
Pricing by quality level
Pads and rotors cost by quality
The following ranges cover typical choices from economy to premium for pads and rotors, per axle and per rotor where applicable.
- Brake pads (per axle): Economy $25–$60; Mid-range $60–$120; Premium $120–$200
- Brake rotors (per rotor): Economy $20–$40; Mid-range $40–$80; Premium $80–$150
- Labor (per axle): $80–$150
Costs scale with rotor type, coatings, and whether the parts are OEM or aftermarket. The total for all four wheels multiplies these values by two axles for pads and by four rotors, plus labor for two axles. Always verify exact quotes with your chosen shop and consider your vehicle’s specific needs.
Installed cost ranges for all four wheels
Using the ranges above, here are approximate installed totals for all four corners, by quality level.
- Budget/Economy: Parts $130–$280; Labor $160–$300; Total installed $290–$580
- Mid-range: Parts $280–$560; Labor $160–$300; Total installed $440–$860
- Premium/Performance: Parts $560–$1000; Labor $160–$300; Total installed $720–$1300
These totals are typical ranges. Real-world quotes vary by vehicle, local labor rates, and the exact brands and rotor designs you select. Additional services such as brake fluid flushes, rotor resurfacing (where permitted), or ABS-related checks can add to the bill.
Summary
For all four wheels, you can expect a broad spectrum depending on quality and vehicle type. Budget installs generally fall around $290–$580, mid-range around $440–$860, and premium setups can run roughly $720–$1300, counting parts and labor. Always obtain a detailed written estimate, confirm whether rotors can be resurfaced or must be replaced, and factor in any ancillary services your shop recommends to ensure safe, effective braking for your car.
