How much are the engine mounts for a Honda Element?
In short: expect roughly $60–$300 per mount, with installed costs typically ranging from a few hundred to about a thousand dollars depending on how many mounts are replaced and labor rates.
The Honda Element, produced from 2003 to 2011, relies on multiple engine mounts to isolate vibrations and secure the 2.4-liter engine. Prices vary by source (OEM vs aftermarket) and by whether you buy a single mount or a complete set. This guide covers current pricing, what mounts exist, and how to budget for replacement and installation.
What engine mounts does a Honda Element use?
Most Element models use two engine/torque mounts and one transmission mount. Some configurations may include an additional rear or accessory mount. Replacement decisions typically hinge on wear, leakage (for hydraulic mounts), and vibration symptoms.
Front/Left engine mount
The forward engine mount secures the engine to the front of the engine bay; this mount can wear with age and cause increased engine movement.
Rear/Right engine mount (torque mount)
Located toward the back of the engine, this mount helps absorb torque; wear leads to clunks or vibrations during acceleration or deceleration.
Transmission mount
Secures the transmission to the subframe; failure may cause drivetrain movement or alignment issues that can affect shifting.
Price ranges and what affects cost
Prices vary by mount type and source. The following ranges reflect typical market prices across parts retailers and dealers today.
- OEM engine mounts: approximately $150–$300 per mount, depending on the exact model year and mount.
- OEM transmission mount: typically $100–$250.
- Aftermarket engine mounts: commonly $60–$150 per mount (some premium brands may be higher).
- Aftermarket transmission mounts: about $40–$120.
- Complete mount kit (all mounts): roughly $200–$650, depending on how many mounts and the brand.
Note that replacing all mounts at once can reduce total labor time and complexity, which may affect overall cost. Prices can vary by region and retailer, and warranties differ by source.
Labor and installation considerations
Labor costs depend on shop rates, location, and whether other components are involved. The following ranges reflect typical scenarios.
- Typical job time: 2–4 hours for a single mount, 4–6 hours for multiple mounts or if access is restricted.
- Average labor rate: roughly $100–$150 per hour in many U.S. shops; dealer service centers can be higher.
- Estimated labor cost range: about $200–$600 for replacing a full set, varying with number of mounts and local rates.
Always request a written estimate that itemizes parts and labor, and ask whether the price includes any necessary ancillary work (alignment, checks, or re-tightening after cooling).
Where to buy and installation tips
Choosing the right supplier can affect fit, performance, and warranty. Consider these options when shopping for Honda Element mounts.
- OEM parts from a dealership or authorized parts retailer for guaranteed fit and warranty.
- Reputable aftermarket mounts from recognized brands offering direct-fit claims and warranties.
- Used or remanufactured mounts from salvage yards or online marketplaces at lower cost but with higher risk.
- Salvage yards or online marketplaces: verify fitment by part number and engine variant; inspect for cracks or signs of oil seepage.
Tip: Make sure the part numbers match your Element’s year and engine (the 2.4L K-series in most models). After replacement, have the vehicle inspected or realigned if needed to ensure proper mounting torque and exhaust clearance.
Summary
Engine mounts protect the engine and reduce vibration by anchoring the powertrain to the chassis. For a Honda Element, expect a price range from roughly $60 to $300 per mount, with installed costs typically between a few hundred and about a thousand dollars depending on parts choice and labor. OEM parts provide reliability and warranty; aftermarket mounts offer cost savings with varying warranty terms. If you notice increased engine movement, clunking noises, or noticeable vibration, schedule a mount inspection and plan for replacement with a trusted technician.
