How much coolant does a 2008 Ford Focus hold?
The 2008 Ford Focus has a coolant capacity of approximately 6.5 quarts or 6.1 liters. This is the standard coolant capacity for the 2.0-liter engine found in the 2008 Ford Focus. The exact coolant capacity may vary slightly depending on the specific model and options of the vehicle.
Detailed Coolant Capacity Information
The 2008 Ford Focus is equipped with a 2.0-liter Duratec engine, which has a total coolant system capacity of around 6.5 quarts or 6.1 liters. This includes the engine block, radiator, and all connecting hoses and components that are part of the vehicle's cooling system.
It's important to use the correct type and amount of coolant when servicing or refilling the cooling system of a 2008 Ford Focus. Ford recommends using a high-quality, pre-mixed coolant that meets the Ford specification WSS-M97B44-D. This coolant is typically a 50/50 mix of antifreeze and distilled water, providing freeze and corrosion protection for the engine and cooling system.
Coolant Maintenance Tips
- Check the coolant level regularly, especially before long trips, and top up as needed.
- Flush and replace the coolant according to the manufacturer's recommended service intervals, typically every 30,000 miles or 2 years.
- Inspect the cooling system for any leaks or damage to hoses, clamps, and other components.
- Use only the recommended Ford-approved coolant to maintain the integrity of the system.
- Avoid mixing different types of coolant, as this can lead to compatibility issues and potential damage.
Proper maintenance of the cooling system is essential for the long-term health and performance of the 2008 Ford Focus engine. Following the manufacturer's guidelines for coolant capacity and service will help ensure your vehicle runs smoothly and efficiently.
How many gallons does a 2008 Ford Focus hold?
Fuel & MPG
| Range in miles (city/hwy) | 324.0/472.5 mi. |
|---|---|
| Fuel tank capacity | 13.5 gal. |
How much coolant does a 2008 Ford Focus take?
Coolant — Motorcraft Premium Gold engine coolant or equivalent. Capacity is 6.1 quarts (5.75 liters). (Note: Ford recommends use of Motorcraft Cooling System Stop Leak Pellets or equivalent.)
How much coolant is in a Ford Focus?
Capacities and Specifications
| Item | Capacity |
|---|---|
| Engine oil fill capacity including the oil filter. | 5.7 qt (5.4 L) |
| Engine oil fill capacity excluding the oil filter. | 5.4 qt (5.1 L) |
| Engine coolant fill capacity. | 9.7 qt (9.2 L) |
| Brake fluid fill capacity. | Between MIN and MAX on brake fluid reservoir. |
How much should I fill my coolant reservoir?
The coolant level should be between the F(full) and L(low) marks on the side of the coolant reservoir.”
What kind of coolant does a 2008 Ford Focus take?
Motorcraft – Gold 50/50 Prediluted Antifreeze / Coolant, 1 Gallon (Part No. VC-7DIL-B) The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.
How much is the coolant capacity?
How much coolant is needed in a car? The average car's cooling system holds about 5 litres of coolant – and most vehicles require between 3 and 7 litres of coolant at a time.
How many gallons of coolant do I need?
Let's consider an example: If the cooling system capacity of a vehicle is 12 gallons and the manufacturer recommends a 50/50 mix, you would need 6 gallons of antifreeze to fill the radiator. In this case, you would mix 3 gallons of antifreeze with 3 gallons of distilled water.
How much coolant do I add when empty?
An average engine holds about 3 quarts (2 liters) of coolant, but this amount may vary depending on the vehicle's make, model, and type. For example, some Toyota models use only 1.5 quarts (1.5 liters), while others require 3 quarts (3 liters).
How many gallons does it take to fill a Ford Focus?
It took 12.5 gallons. The specs say that the 2016 has a 12.4 gallon tank.
What color is Ford coolant?
Motorcraft® Premium, Gold and Orange Antifreeze/Coolants are now available pre- mixed 50/50 with deionized water. The 50/50 mixture helps ensure vehicles get optimal corrosion, freeze and overheat protection and minimizes possible mix errors by technicians.
