How much did a 55 Chevrolet weigh?
A typical 1955 Chevrolet weighed about 3,000 to 3,400 pounds (1,360 to 1,540 kg) depending on model and options.
In this article, we examine how weight varied across common 1955 Chevy models, what factors influenced curb weight, and how these figures relate to performance and restoration considerations from that era.
Weight range for 1955 Chevrolets
These figures are approximate curb weights for stock models as they left the factory, with variations by body style and equipment.
- Chevrolet 150 (base model, typically with an inline-6): about 2,900–3,050 lb (1,315–1,385 kg).
- Chevrolet 210 (mid-range, available with inline-6 or V8): about 3,000–3,150 lb (1,360–1,430 kg).
- Chevrolet Bel Air (top trim, often with a V8): about 3,200–3,400 lb (1,450–1,540 kg).
These ranges illustrate how weight increased with more powerful engines and higher trim levels, while base models stayed lighter on the scale.
Factors that influenced weight
Several variables determined where a specific 1955 Chevrolet fell within or beyond the above ranges.
- Engine choice: inline-6 vs small-block V8; V8 configurations added weight relative to six-cylinder powerplants.
- Transmission and drive setup: manual vs. automatic transmissions and the inclusion of options like power steering or power brakes.
- Body style and trim level: sedans, hardtops, and Bel Air variants carried different structural masses and interior fittings.
- Options and accessories: radios, air conditioning, and other comfort or performance features added incremental pounds.
In practice, these factors typically kept weights within the 2,900–3,400 lb window for most stock configurations, with wagons or luxury-oriented builds tending toward the upper end.
Notable notes for restoration and ownership
For collectors, the exact curb weight of a specific 1955 Chevy can matter for authenticity and performance planning. Always refer to the vehicle’s data tag and the original brochure or factory data sheets when precise numbers are needed for restoration, weight ratings, or balance considerations in a restoration build.
Summary
In summary, a 1955 Chevrolet’s weight varied by model and equipment, but most cars weighed roughly 3,000 to 3,400 pounds when new. Base models were closer to the 2,900–3,050 lb range, while higher-trim Bel Air variants with V8s and additional options tended toward the upper end of the spectrum. For accurate figures on a specific car, consult its factory documentation and data plates.
How much is a 55 Chevy worth today?
The value of a 1955 Chevrolet Bel Air can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $35,775 for a 1955 Chevrolet Bel Air in good condition with average spec.
How much does a 1955 Chevy 3100 weigh?
Equipped with the six, the 3100 pickups weighed in at 3,210 lbs. and carried a base price of $1,519, which was only $89 more than the base price of the holdover First Series trucks. The 3100 trucks rode on a 114-inch wheelbase chassis and measured 185.7 inches in length.
How much does a 1955 Chevy weigh?
A 1955 Chevy's weight varies by model, but a 1955 Chevrolet Bel Air hardtop weighs around 3,165 lbs. Other models like the Bel Air convertible are heavier, at approximately 3,456 lbs, while the 3100 pickup is about 3,210 lbs.
- Bel Air Hardtop: 3,165 lbs
- Bel Air Convertible: 3,456 lbs
- 3100 Pickup: 3,210 lbs
- Nomad: 3,362 lbs
How much does a 1956 Chevy truck weigh?
The 1956 Chevy 1/2 ton Type 3100 with a 6-cylinder engine typically weighs around 3,400 to 3,600 pounds curb weight.
