How much does a 1951 Chevy truck weigh?
In general, a 1951 Chevy pickup’s curb weight falls roughly between 3,000 and 5,000 pounds, depending on model and equipment.
During Chevrolet’s Advance-Design era in 1951, the company offered several truck configurations. Weights vary with the model designation (which denotes payload capacity), cab and bed configurations, and optional equipment. The figures below refer to factory curb weights—the truck as built, with standard equipment, before fuel or payload is added.
Weight ranges by model
The following figures represent approximate factory curb weights for the main 1951 Chevrolet trucks. Actual weights vary with cab style, bed length, and factory options.
- 3100 (half-ton): about 3,000–3,400 pounds
- 3600 (3/4-ton): about 3,800–4,200 pounds
- 3800 (1-ton): about 4,600–5,000 pounds
These ranges reflect typical curb weights for the era. Variations in cab design, bed length, and optional equipment can shift the numbers by a few hundred pounds in either direction.
What else affects the weight
Key factors that change a 1951 Chevy truck’s weight
Beyond the model designation, several design choices and options can push the weight up or down by hundreds of pounds.
- Bed length and cab configuration (short bed vs. long bed; standard versus deluxe cab).
- Engine, transmission, and drivetrain choices (powertrain combinations and axle ratios).
- Additional equipment and options (heater, defroster, radio, chrome trim, and other accessories).
In practice, a well-equipped long-bed truck with extra options may approach the higher end of the range, while a basic, bare-bones configuration may sit near the lower end.
Summary
For most 1951 Chevy trucks, curb weight centers around 3,000–5,000 pounds, with half-ton models closer to 3,000–3,400 pounds and the heavier 1-ton configurations approaching 5,000 pounds. Always verify the exact weight on the vehicle’s data plate or manufacturer documentation for a specific truck, as configurations and options can shift the figure noticeably.
How much does a 1950 Chevy truck weigh?
A 1950 Chevy 3100 pickup truck typically weighs around 3,175 to 3,210 pounds, while a larger one-ton model would be significantly heavier, around 4,200 pounds. The exact weight depends on the specific configuration, such as the cab and bed size, as well as any added equipment or modifications.
- 1/2 Ton (3100 Series): Approximately 3,175 to 3,210 pounds.
- 1 Ton: Around 4,200 pounds.
How much does a 1948 Chevy truck weigh?
- Height: 72.8 in. - Wheelbase: 116 in. Curb Weight: - Approximately 3,300-3,500 lbs.
How much does a 1951 Chevy truck weight?
The half-ton '51 Chevy pickup scaled in at a mere 3,120 pounds.
How much is a 1951 Chevy truck worth?
The value of a 1951 Chevy truck, like the popular 3100 model, ranges significantly depending on its condition, originality, and any modifications, with good-condition models typically valued around $20,000 to $24,000, while high-end, restored, or rare versions can sell for well over $100,000. Poorly maintained trucks may have the lowest values, but exceptional examples can command much higher prices, with some "restomods" reaching over $150,000.
Factors influencing value
- Condition: The overall condition is the biggest factor. A well-maintained or fully restored truck will be worth more than one in poor condition with extensive needs.
- Originality: Vehicles that retain a high degree of original parts and features are generally more valuable than those with many modifications.
- Modifications: "Restomods" that combine classic looks with modern upgrades can sell for very high prices. However, poor or amateur modifications can negatively impact value.
- Rarity and Features: Specific configurations, such as particular engine options, body styles, or historical significance, can influence a truck's value.
- Mileage and History: Low mileage and a clean history can add to the value, while high mileage or a history of accidents can decrease it.
Price range examples
- Good condition: Around $20,000 - $24,000 for a model like the 3100 in good condition with average specifications.
- Excellent/High-end: Prices can easily exceed $100,000 for perfectly restored examples.
- Restomods: Highly customized trucks can sell for over $150,000.
- Low end: Trucks in poor condition may sell for as low as $10,000 or less.
