How much does a brake job cost on a Ford Explorer?
The cost of a brake job on a Ford Explorer can vary depending on several factors, but on average, it typically ranges from $300 to $800. This comprehensive guide will provide you with a detailed breakdown of the factors that influence the cost of a brake job on this popular SUV.
Factors Affecting Brake Job Costs
The cost of a brake job on a Ford Explorer can be influenced by the following factors:
- Parts Needed: The specific parts required for the brake job, such as brake pads, rotors, calipers, and brake fluid, can significantly impact the overall cost. Genuine Ford parts tend to be more expensive than aftermarket alternatives.
- Labor Costs: The labor required to complete the brake job, including the time it takes to remove and replace the necessary components, can vary depending on the mechanic's hourly rate and the complexity of the work.
- Brake System Condition: If the brake system has additional issues, such as worn or damaged components, the cost of the brake job may increase to address these problems.
- Location: The geographic location of the repair shop can also affect the overall cost, as labor and parts prices can vary by region.
It's important to note that the cost of a brake job can also be influenced by the specific model year and trim level of the Ford Explorer, as well as the driving conditions and maintenance history of the vehicle.
Typical Brake Job Costs for a Ford Explorer
Based on the factors mentioned above, a typical brake job on a Ford Explorer can range from $300 to $800. Here's a more detailed breakdown:
- Brake Pads Replacement: $150 to $300 per axle
- Brake Rotor Replacement: $200 to $400 per axle
- Brake Caliper Replacement: $150 to $300 per caliper
- Brake Fluid Flush: $50 to $100
- Labor Costs: $100 to $200 per hour, with an average of 2 to 4 hours of labor
It's important to note that these are just estimates, and the actual cost of a brake job on your Ford Explorer may vary based on the specific circumstances of your vehicle and the repair shop you choose.
Conclusion
The cost of a brake job on a Ford Explorer can vary significantly, but on average, it typically ranges from $300 to $800. By understanding the factors that influence the cost, you can better prepare for the expense and make informed decisions when it comes to maintaining the brakes on your SUV.
How much does Ford charge for a brake job?
Ford Brake FAQs
Ford brake pads can cost you between $185 per axle and $375 per axle depending on the type of brake pad desired. Brakes To Go mobile brake service only charges around $139 and they come to you for convenient brake jobs.
How much should a full brake job cost?
Each aftermarket rotor costs an average of $30 to $75. Labor to service brakes can run from $90 to $200 per hour. Brake service generally runs approximately $200 to $500 per axle at a professional center. Calipers are typically the most difficult and expensive aspect of the braking system to service.
Do rotors last longer than pads?
As a general rule, you should get your brake pads replaced every 10,000 to 20,000 miles to keep wear to a minimum. When it comes to your rotors, you have a bit longer. Your rotors should be replaced between 50,000 and 70,000 miles to keep your brakes in peak health.
How much does Ford charge for new brakes?
Average Cost of Ford Brake Pads and Discs
| Average Cost of Ford Brake Pads and Discs | |
|---|---|
| Ford Fiesta | £291.77 |
| Ford C-Max | £378.68 |
| Ford Mondeo | £392.98 |
| Ford Focus | £420.53 |
What does Firestone charge for a brake job?
Firestone Cost and Service Breakdown
| Brake Pads | Brake Pads & Rotors |
|---|---|
| $130-$240 per axle (includes rotor resurfacing) | $345-$398 per axle |
How long should brakes last on a Ford Explorer?
between 30,000 and 70,000 miles
Brake pads can last anywhere between 30,000 and 70,000 miles. Their longevity depends on your driving style and typical driving conditions.
How many hours does a full brake job take?
between four and six hours
A complete brake job has an estimated labor time of anywhere between four and six hours, depending on several factors. It involves a thorough inspection of the entire braking system and its parts. Mechanics usually check for leaks, corroded brake lines, seized pistons, and other worn-out brake hardware.
How long should a full brake job take?
between four and six hours
A complete brake job has an estimated labor time of anywhere between four and six hours, depending on several factors. It involves a thorough inspection of the entire braking system and its parts. Mechanics usually check for leaks, corroded brake lines, seized pistons, and other worn-out brake hardware.
How to tell if rotors are bad?
Some common symptoms of bad rotors include vibration or pulsation in the steering wheel, high-pitched squealing noise when braking, shaking steering wheel, brake pedal pulsing, vehicle taking a long time to stop, loud bangs while braking, large edges on the outer part of the brake rotor, and scratch marks on the rotor.
How much is a brake job for a Ford Explorer?
Ford Explorer brake pads replacement, which includes parts and labor, can cost anywhere between $150 and $300 per axle depending on the type of brake pads required and the extent of the damage your previously worn down pads have caused to the other parts of your vehicle such as the rotors.
