How much does a Dodge Coronet weigh?
The Dodge Coronet generally weighs about 3,200 to 4,000 pounds, depending on year, body style, and engine. Lighter base models tend to be in the low to mid 3,000s, while heavier muscle-era or fully equipped trims can approach 4,000 pounds.
What affects the weight of a Dodge Coronet
Key factors
The weight of a Dodge Coronet is not fixed. It varies with model year, body style (coupe, sedan, wagon, convertible), engine choice, and equipment packages (air conditioning, power windows, heavy-duty suspensions, police or pursuit options, and reinforcement for convertibles). Even similar cars from the same year can differ by a few hundred pounds due to options and structural differences.
Estimated curb weights by era and configuration
Below are approximate curb weight ranges drawn from typical factory specifications for representative Coronet configurations. Actual weights can vary by option list and VIN-specific build details.
- 1950s–early 1960s Coronet (early generations): about 3,200–3,500 pounds for standard sedans/coupes; convertibles can be heavier due to structural reinforcements.
- Mid-1960s (roughly 1965–1967): roughly 3,400–3,700 pounds, with heavier models pushing toward the upper end depending on trim and options.
- Late 1960s to early 1970s (1968–1970): typically 3,700–3,900 pounds for standard body styles; four-door and higher-trim versions can approach 4,000 pounds.
- Late 1970s (1974–1976, when weight increased due to bumpers and emissions equipment): about 3,900–4,100 pounds for common configurations.
These figures reflect curb weight, i.e., the vehicle with standard equipment and fluids but not including payload or passengers. For precise data on a specific car, consult factory data, build sheets, or a verified registry.
Weight by body style
Weight can vary by body style due to structural requirements and equipment. Convertibles, for example, tend to be heavier than their coupe counterparts because of reinforcement and additional hardware. Wagons and police/pursuit variants may also skew heavier compared with base sedans.
- Two-door coupe: commonly in the 3,500–3,800 pound range, depending on era and options.
- Four-door sedan: often similar to or slightly heavier than a coupe, typically 3,600–3,900 pounds.
- Convertible: usually toward the higher end of the range (roughly 3,700–4,000+ pounds) due to reinforcement and structural requirements.
- Wagon: tends to be among the heaviest Coronet body styles, often near 3,900–4,100 pounds or more with equipment.
When comparing weights by body style, remember that engine choice (small-block vs. big-block), options, and production year can cause noticeable differences within each category.
How to verify the weight for a specific Coronet
Primary sources and steps
To determine the exact curb weight for a given Dodge Coronet, use these steps to confirm from reliable sources:
- Check the original factory data plate or VIN build sheet, which lists the vehicle’s curb weight and GVWR.
- Consult the owner’s manual or a period service manual for the exact specifications of that model year and trim.
- Refer to period brochures, dealer fact sheets, or registry databases (e.g., Hemmings, MCA, or dedicated Coronet registries) that publish weight figures by model/year.
- If possible, have the car weighed on a certified scale (public weigh stations or automotive scales) to obtain a precise real-world figure.
These steps help ensure you have the exact number for a given car, which is especially important for restoration work, insurance, or performance planning.
Summary
In short, a Dodge Coronet’s weight is not fixed. It spans roughly from the low 3,200s to about 4,000 pounds, influenced by year, body style, engine, and options. For an exact figure, consult the specific car’s build data, manuals, or a verified registry, or obtain an official scale weight.
