How much does it cost to get Subaru brakes replaced?
The cost to replace Subaru brakes can vary depending on several factors, but on average, it typically ranges from $300 to $800 for parts and labor. This includes the cost of new brake pads, rotors, and any necessary hardware or fluid replacement.
Factors Affecting Subaru Brake Replacement Costs
The exact cost to replace Subaru brakes can be influenced by the following factors:
- Vehicle Model and Year: Newer Subaru models or higher-end trims may require more expensive brake components, leading to a higher overall cost.
- Type of Brake Work Needed: Replacing just the brake pads will be less expensive than a full brake job that includes new rotors and calipers.
- Labor Costs: The labor rate charged by the mechanic or dealership can vary significantly based on location and the complexity of the work required.
- Brake Component Prices: The cost of brake pads, rotors, and other parts can fluctuate based on the brand, quality, and availability of the specific components needed for your Subaru model.
It's important to note that regular maintenance and inspections can help extend the life of your Subaru's brakes, potentially delaying the need for a full replacement and saving you money in the long run.
Typical Subaru Brake Replacement Costs
Here are some general estimates for the cost of common Subaru brake replacement services:
- Brake Pad Replacement: $150 to $300 per axle
- Brake Rotor Replacement: $200 to $400 per axle
- Full Brake Job (Pads and Rotors): $300 to $800 per axle
- Caliper Replacement: $200 to $400 per caliper
- Brake Fluid Flush: $50 to $100
These prices can vary depending on the specific Subaru model, the mechanic or dealership performing the work, and the quality of the replacement parts used.
How long does it take to replace all 4 brakes?
A complete brake job is a thorough inspection of every brake part in the system, which explains why the task can take a while. A complete brake job has an estimated labor time of anywhere between four and six hours, depending on several factors.
Is it more expensive to get brakes done at dealership?
Replacing brake pads at a dealership can be the most expensive option, with costs ranging from $500 to $1000 or more. Independent mechanics typically charge less, with prices ranging from $200 to $500.
How much are 4 sets of brakes?
To replace all four brake pads, including parts and labor the cost ranges between $230 and $600 for all four wheels.
How long do Subaru brakes last?
25,000 to 70,000 miles
On average, pads need to be changed every 25,000 to 70,000 miles depending on the type of pads you have. Your car service manual gives the exact replacement time for your Subaru model. The replacement time can be affected by both driving conditions and your driving style.
How much should a full brake job cost?
Each aftermarket rotor costs an average of $30 to $75. Labor to service brakes can run from $90 to $200 per hour. Brake service generally runs approximately $200 to $500 per axle at a professional center. Calipers are typically the most difficult and expensive aspect of the braking system to service.
How much does it cost to replace all 4 brakes on a car?
The average front brake pad replacement cost is between $115 and $300; this is about the same as the cost of rear brake pad replacement. The cost of replacing all four brake pads, including parts and labor, ranges between $230 and $600 for all four wheels.
How do I know if my Subaru brakes are bad?
4 Signs You Should Talk to a Subaru Dealer about Brake Repair
- Squeaking or Grinding Noise. If you hear squeaking or grinding when braking, it's a sign your vehicle needs a brake job.
- Vibrations in the Brake Pedal.
- Dashboard Warning Light.
- Pulling to One Side.
Should I replace all 4 brake pads at once?
Typically, you should have both your front brake pads replaced at the same time, and your rear pads replaced at the same time, to ensure proper braking power. Of course, to make it easier on yourself with one simple visit, rather than two to four visits, you may want to replace all four brake pads at the same time.
How to tell if rotors are bad?
Some common symptoms of bad rotors include vibration or pulsation in the steering wheel, high-pitched squealing noise when braking, shaking steering wheel, brake pedal pulsing, vehicle taking a long time to stop, loud bangs while braking, large edges on the outer part of the brake rotor, and scratch marks on the rotor.
Can I just replace brake pads and not rotors?
Yes, you can replace just the brake pads if the rotors are still in good condition, with no warping, deep grooves, or excessive wear. However, if the rotors are damaged or worn, they should be resurfaced or replaced to ensure optimal braking performance and prevent uneven wear on the new pads.
