How much does it cost to replace a fuel filter on a Chevy Traverse?
On most Chevy Traverse models, you should plan for about $500 to $900 to replace the fuel filter, including parts and labor. The exact price depends on your year and engine, and whether the filter is serviceable separately or only through the fuel-pump module replacement.
In modern Traverse versions, the fuel filter is typically located inside the fuel tank and is not designed to be replaced as a standalone component. When service is needed, shops often replace the entire fuel-pump module, which can raise the price but ensures the system is renewed. Prices vary by model year, engine option, and local labor rates, and can be higher at a dealer than at an independent shop.
Cost overview by service scenario
Prices vary depending on whether the filter can be serviced separately or if the pump assembly must be replaced. Here are the common ranges you may see.
- Serviceable separate fuel filter (rare on Traverse): Parts roughly $15–$60; labor about 0.5–1 hour; total typically $60–$150.
- Fuel-pump module replacement (most Traverse models): Parts roughly $200–$600; labor about 1.5–2.5 hours; total roughly $400–$1,000. Some shops may charge more for dealer parts or diagnostic fees, which can push the total higher.
- High-end or dealership scenarios with OEM parts and added service: Parts $350–$900; labor 2–3 hours; total $800–$1,800.
For most Traverse owners, the middle range is the typical expectation, particularly when the pump module is involved. Always confirm whether your exact VIN and engine require a separate filter replacement or a pump-module replacement to avoid surprises on the invoice.
Is the fuel filter serviceable separately on a Chevy Traverse?
On newer Chevrolet Traverse models, the fuel filter is usually integrated with the fuel-pump module inside the tank, meaning there is no standalone filter to replace. If the filter needs replacement, the pump module is typically swapped as a unit. A few older trims or rare configurations might have an inline, serviceable filter, but this is uncommon for the Traverse. Always check your specific year, engine, and VIN with the dealer or a trusted mechanic.
Other factors that can influence price
Several variables can push the final cost up or down. Consider these when you shop for estimates.
- Year and engine variant (3.6L V6 vs. other options) and the corresponding fuel-system design.
- Labor rate and regional pricing differences between dealers and independent shops.
- Parts choice: OEM GM parts versus aftermarket components.
- Whether diagnostic work is included or billed separately.
- Additional related work (e.g., fuel-pump replacement timing, fuel-system cleaning) that may be recommended.
- Warranty or service plan coverage that could offset costs.
Understanding these factors will help you compare quotes more accurately and avoid surprises at the shop.
Summary
The cost to replace a fuel filter on a Chevy Traverse is largely determined by whether the filter is serviceable separately or tied to a fuel-pump module replacement. Most modern Traverses require replacing the pump module, placing the typical total in the $400–$1,000 range, with higher prices at dealerships or for premium parts. If a serviceable inline filter exists for your specific model and engine, the cost can be considerably lower (roughly $60–$150). Always obtain a written estimate that breaks out parts and labor, and confirm the exact service needed for your VIN.
