What is the bolt pattern on a 1996 Ford F350?
The bolt pattern for most 1996 Ford F-350 models is eight lug holes on a 6.75-inch circle (8x6.75"). Some catalogs list a metric equivalent around 170 mm (8x170 mm).
What the pattern means for your truck
Wheel bolt patterns describe how many studs and the diameter of the circle they form. For the 1996 F-350, the standard fitment is eight lugs on a 6.75-inch circle, a setup used by most SRW and DRW models of that era. Variations exist depending on trim and axle configuration, so it's important to verify for your exact vehicle.
Below are the key details and how to confirm them:
- Pattern: eight lug holes on a 6.75-inch bolt circle (8x6.75").
- Metric equivalent: commonly listed as 8x170 mm in some catalogs and by aftermarket wheel suppliers.
- Scope: applies to most 1994–1999 Ford F-350 trucks, including SRW and DRW, before Ford's 1999 redesign of the Super Duty line; always verify for your specific build with VIN or manual.
When shopping for wheels or tires, also confirm the hub bore size and offset compatibility to avoid fitment issues.
How to verify your exact configuration
To confirm the bolt pattern on your individual truck, use these steps:
- Check the owner's manual or the door jamb placard for wheel specs (lug pattern, wheel size, and hub bore).
- Count the lug holes on the current wheel or hub; you should count eight for this pattern.
- Measure the bolt circle diameter by measuring from the center of one lug hole to the center of the opposite lug hole and doubling the distance.
- If you’re uncertain, contact a Ford dealer or use your VIN to pull the exact build sheet, especially for dual-rear-wheel (dually) configurations that use the same lug count but have different hub details.
Verifying these details ensures you select wheels that fit safely and correctly on your 1996 F-350.
Summary
In summary, the 1996 Ford F-350 generally uses an 8-lug bolt pattern on a 6.75-inch bolt circle (8x6.75"), with some sources listing the metric equivalent as 8x170 mm. Always verify with your vehicle’s documentation or by consulting Ford with your VIN to account for any configuration-specific variations.
When did Ford switch from 8x6.5 to 8x170?
1999
Ford , GM, dodge all had 8x6. 5 bolt pattern from pre 1980 all the way until 1999 and that's when ford changed to 8x170.
What is the bolt pattern on a 1997 Ford F350?
The 1997 Ford F-350 has an 8x6.5 inch (or 8x165.1mm) bolt pattern. This is the final year that Ford used this older bolt pattern before switching to the 8x170mm pattern for the 1999 model year Super Duty trucks.
- Bolt Pattern: 8x6.5 inches or 8x165.1mm.
- Model Year: 1997 is the last year for this pattern, which was used on previous generation F-Series trucks as well.
- 1999+ Models: The bolt pattern changed to 8x170mm for the 1999 and newer Super Duty trucks. You would need adapters or different axles to fit newer wheels on a 1997 model.
What is the bolt pattern on a 1995 Ford F350?
The bolt pattern for a 1995 Ford F-350 is 8x6.5 inches (or 8x165.1mm). This is a standard fitment for the 1992-1997 F-350 generation, and it applies to both single and dual-wheel models for that year range.
- Bolt Pattern: 8x6.5" (8 lugs on a 6.5-inch circle)
- Metric Equivalent: 8x165.1mm
What lug pattern is a 96 Ford F350?
Finance your Ford-2 Wheels
| YEAR | MAKE | COMMENTS |
|---|---|---|
| 1996 | Ford | 8 lug 6.5 inch or 165.1mm Standard Offset |
| 2000 | Ford | 8 lug 6.69 inch or 170mm Standard Offset |
| 2001 | Ford | 8 lug 6.69 inch or 170mm Standard Offset |
| 2002 | Ford | 8 lug 6.69 inch or 170mm Standard Offset |
