How much does it cost to replace a fuel pump on a Dodge Charger?
Replacing the fuel pump on a Dodge Charger typically costs between $500 and $1,500 in the United States, with the total price depending on the model year, fuel-pump type, labor rates, and whether you choose a dealership or an independent shop. The pump module itself often falls in the $150–$500 range, while labor can run from about $350 to $1,000 or more, depending on access and regional rates.
What drives the price
Understanding the cost requires looking at several key factors that influence both parts and labor charges.
Parts quality: OEM vs aftermarket
The fuel pump module is available as OEM Mopar or aftermarket equivalents. OEM parts tend to cost more but are designed to match the exact fit and performance of your Charger. Aftermarket pumps can be cheaper but may carry compatibility or warranty considerations.
Repair location: independent shop vs dealership
Other variables include the specific Charger model year, whether the pump is an in-tank module (common for Chargers) or a different design, and whether the tank must be lowered to access the pump. Diagnostic checks and potential ancillary replacements (like sending units or fuel filters) can also affect the final price.
Typical price ranges and what you pay for
To anchor expectations, here are the common cost bands you’ll encounter depending on where you have the work done and what parts are used.
- Parts: aftermarket fuel pump module commonly $150–$300; OEM Mopar modules often $350–$500 (or higher for certain model years).
- Labor: independent shop typically 2–4 hours at $75–$125 per hour; dealership often 3–6 hours at $120–$180 per hour.
Put together, independent shops usually price around $450–$900 total, while dealerships can bill roughly $900–$1,600 or more, depending on the specifics of the job and local rates.
Note that these ranges are general and can vary by location, year, and whether any related components require replacement during the service. If the fuel tank or related wiring is particularly challenging to access, the job can run longer and cost more.
What to expect during service
Replacing a Dodge Charger's fuel pump is a labor-intensive task because the pump is located inside the fuel tank. Expect the technician to relieve fuel pressure, drain and remove or lower the tank, disconnect electrical plugs and fuel lines, install a new pump module, reinstall the tank, and test for leaks and proper fuel pressure. The process requires specialized tools and safety precautions and typically takes several hours.
DIY viability
Given the safety risks associated with gasoline and the complexity of accessing the pump, this repair is generally not recommended for DIY beginners. Improper installation can lead to fuel leaks, fire hazards, and potential warranty issues.
Ways to save money
Consider these strategies to keep costs reasonable without compromising reliability.
- Get multiple written estimates from independent shops and compare the parts lists and labor hours.
- Ask about aftermarket pumps that meet your Charger’s specifications and whether they carry the same warranty as OEM parts.
- Inquire about bundled services (e.g., replacing the fuel filter or performing a diagnostic check) that may reduce overall labor time.
- Check for any relevant recalls or manufacturer advisories that might cover part of the repair.
Being proactive with quotes and clarifying what’s included in the price can prevent unexpected charges at the service desk.
Summary
For a Dodge Charger, a fuel-pump replacement typically runs from about $500 to $1,500, with the average cost falling near the mid-range if you use an independent shop and aftermarket parts. dealership repairs tend to be on the higher end due to labor rates and OEM pricing. By comparing quotes, confirming part types, and understanding what work is required for your specific year and model, you can manage the cost effectively and avoid surprises at the shop.
