How much does it cost to replace a PCV valve on a Honda Civic?
Replacing the PCV valve on a Honda Civic typically costs about $60 to $150 at a shop, with the valve itself priced around $5 to $25. If you do it yourself, you can pay as little as $5 to $25 for the valve, plus whatever tools you already own.
What drives the price
Several factors determine the final bill. Here are the main cost drivers you should know about.
- Part price: OEM vs aftermarket PCV valve price varies; Honda OEM parts typically fall in the $10–$30 range.
- Labor rate and time: Regional differences in shop rates and the typical 0.3–1 hour of labor for this job.
- Engine and model year: Some Civics have different PCV valve locations or require additional hoses or grommets.
- Additional components or services: Replacement hoses, clamps, or valve cover gasket checks can add to the cost.
- Shop type: Dealerships tend to be more expensive than independent shops.
- DIY readiness: Performing the replacement yourself eliminates labor charges but requires basic mechanical skill and time.
In practice, most quotes fall within the ranges above, with higher totals if extra parts are needed or if you choose a dealership.
Typical price ranges by service type
Use this quick guide to estimate what you’ll pay depending on how you handle the replacement.
- Do-it-yourself replacement: PCV valve part typically $5–$25; no labor charges if you do the work yourself.
- Independent repair shop: Roughly $60–$150 total, including parts and labor.
- Dealership: Roughly $90–$200 total, often higher due to OEM pricing and diagnostic checks.
Actual quotes vary by location, model year, and whether extra components are replaced.
DIY replacement basics
If you’re inclined to replace the PCV valve yourself, you’ll usually need basic hand tools. The typical steps are to locate the PCV valve on the valve cover or assembly, detach the vacuum hose or clamp, remove the old valve, install the new one, reattach the hose, and start the engine to check for leaks or rough idle. Always consult your vehicle’s service manual for the exact location and torque specs. On tighter engine bays, you may need to remove other components to access the valve.
Summary
Replacing a PCV valve on a Honda Civic is a straightforward, budget-friendly maintenance task. Expect a DIY cost of about $5–$25 for parts, with no labor if you do it yourself. Professional service at an independent shop typically runs about $60–$150, while dealership pricing can range from $90–$200. Prices vary by model year, engine, and local labor rates, and may include additional parts such as hoses or gaskets. If symptoms like rough idle or reduced fuel economy appear, addressing the PCV valve promptly can prevent bigger problems.
