How much does it cost to replace a wheel bearing on a Acura TSX?

In general, replacing a wheel bearing on a single wheel of an Acura TSX costs roughly $350–$800 at a typical shop, with higher rates at a dealership or when a hub assembly with an integrated ABS sensor is required.

Wheel bearings are essential for smooth rotation and proper wheel alignment. On the TSX, front-wheel bearing work is commonly performed by replacing the front hub assembly (which often includes the ABS sensor), while rear bearings may involve a hub assembly or a pressed-in bearing depending on the year and trim. Labor times typically range from one to two hours per wheel, and final costs depend on your location, the parts chosen, and whether additional components (like sensors or rotor work) are involved.

What affects the price

Several factors influence how much you’ll pay to replace a wheel bearing on an Acura TSX. The following list outlines the main cost drivers.

• Front vs. rear bearing replacement: Front replacements are often more expensive due to the hub assembly and ABS integration.


• Hub assembly vs. bearing-only replacement: Replacing the entire hub assembly is typically easier for the shop but can raise parts costs compared with replacing only the bearing.


• Part quality and source: Aftermarket parts are usually cheaper than OEM/ dealer parts; OEM hubs can increase the price but may offer better fit and warranty.


• ABS sensor and wiring: If the hub includes an ABS sensor or if wiring needs attention, prices go up.


• Labor rate by region: Urban areas and dealership services tend to charge more per hour than independent shops.


• Additional services: Brake rotor resurfacing, caliper service, or wheel alignment can add to the bill if performed at the same time.

Note that prices are indicative and can vary by year, model specifics, and local market conditions. Always seek a written estimate that itemizes parts and labor before proceeding.

Typical cost ranges by position

The following ranges reflect common pricing patterns for a single-wheel replacement and include typical parts and labor. They are meant to give a realistic ballpark, not a guaranteed quote.

• Front wheel bearing/hub assembly replacement: total per wheel typically ranges from about $350 to $800 at an independent shop; parts commonly $120–$350 and labor about 1–2 hours. At a dealership or when OEM hub assemblies with ABS are used, costs can rise to roughly $600–$1,200 per wheel.


• Rear wheel bearing replacement: total per wheel generally runs about $300 to $750 in a standard shop; parts often $100–$300 with similar labor. If a hub assembly with ABS or a dealer-grade part is used, expect higher totals, potentially $500–$900 per wheel.

Prices vary by region, vehicle year and trim, and whether an ABS sensor or related components are included. Request a written estimate with a clear breakdown of parts and labor, and confirm any warranty coverage.

DIY considerations

Replacing a wheel bearing is a labor-intensive repair that requires specialized tools (such as a hub puller or press) and careful handling of ABS components. A confident DIYer with the proper equipment can save on labor, but mistakes can lead to safety risks or additional damage. If you’re not equipped for the job, hiring a professional is strongly recommended.

What to know before attempting a DIY replacement

Factor in tool rental or purchase costs, the time required, and the potential need for a wheel alignment after the replacement. Also consider warranty implications on parts and whether the DIY approach could affect your vehicle’s ABS or stability systems.

Getting estimates and planning

To plan effectively, gather quotes from multiple shops (including a dealer, if you prefer OEM parts). Ask for itemized estimates that separate parts, labor, and any miscellaneous fees. If you’re replacing both front wheels, you can often save on labor by having the service performed together, but confirm any multi-wheel pricing with the shop.

Summary

For a single wheel on an Acura TSX, expect roughly $350–$800 in an independent shop, with higher costs for dealer-level service or hub assemblies that include ABS sensors. Front and rear replacements have different typical ranges, and costs can increase if additional parts or services are required. Always obtain a clear estimate, understand what parts are included, and consider whether a DIY approach is feasible given your tools and expertise. Planning ahead can help you minimize surprises and choose the best value for your needs.

How much to change wheel bearing acura tsx?

The average cost for an Acura TSX Wheel Bearing Replacement is between $321 and $503. Labor costs are estimated between $232 and $340 while parts are priced between $89 and $163.

What is the most common problem with the Acura TSX?

Top Acura TSX Problems

• Loud Rattle Type Noise from Engine After Cold Start.
• Illumination of Entertainment/Navigation Screen and Switches May Fail.
• The Brake Pedal May Become Soft and/or Low.
• Low Tire Light on Due to Faulty Tire Pressure Sensor.

Can I still drive with a bad wheel bearing?

No, it is not safe to drive with a bad wheel bearing. While it may seem okay at first, a failing wheel bearing can lead to a wheel completely breaking off, loss of control, and further, more expensive damage to other parts of the vehicle. You should only drive the shortest possible distance to the nearest repair shop.
 
Risks of driving with a bad wheel bearing 
This video explains how a bad wheel bearing can affect your vehicle: 50sFindTheBestCarPriceYouTube · Apr 6, 2023

• Catastrophic wheel failure: In the worst-case scenario, the bearing can completely fail, causing the wheel to detach from the vehicle while driving. 
• Loss of control: A failing bearing can lead to steering issues, vibrations, and pulling to one side, all of which reduce your control over the vehicle. 
• Accidents: The combination of steering problems and the risk of a wheel coming off can easily lead to a serious accident, even at low speeds. 
• Damage to other components: Continuing to drive can cause collateral damage to other parts like the hub, axle, CV joint, and transmission, increasing repair costs. 
• Uneven tire wear: A bad bearing can cause your tires to wear unevenly and faster than they should. 

This video demonstrates the symptoms of a bad wheel bearing: 59sEasyAutoFixYouTube · Dec 22, 2022
What to do instead

• Drive only to the nearest repair shop: If absolutely necessary, drive very slowly for the shortest possible distance to get it fixed. 
• Avoid the highway: Stay off high-speed roads to minimize the risk and potential for a severe accident. 
• Get it replaced immediately: A bad wheel bearing is a critical safety issue that needs professional attention as soon as possible. 

Is it worth fixing a wheel bearing?

If you're just driving around town, the risk might not feel urgent, but it's still a gamble. The bearing could fail at any time, and if it causes more damage, the repair could end up costing a lot more in both time and money.