How much does it cost to replace a wheel bearing on a Ford Edge?
Typically, replacing a wheel bearing (hub assembly) on a Ford Edge runs about 300 to 700 dollars per wheel, depending on whether you replace just the bearing or the entire hub assembly, the Edge model year, and local labor rates.
Wheel bearing replacement involves removing the wheel hub assembly, which may house the bearing itself and, in many Ford Edge models, the wheel speed sensor. Prices vary based on whether you install an OEM hub or an aftermarket unit, the vehicle’s drivetrain (FWD vs. AWD), and whether any additional work is needed after the replacement, such as an alignment or sensor service.
What affects the cost
Several factors influence the final price you’ll pay for a wheel bearing replacement on a Ford Edge. The following list outlines the main cost drivers you should consider when budgeting for the repair.
- Hub assembly vs bearing-only replacement: Replacing the complete hub assembly (which includes the bearing) is common on modern vehicles and tends to be more expensive than replacing only the bearing in some setups.
- Parts quality and source: OEM (factory) hubs are typically pricier than aftermarket options, but some buyers opt for reputable aftermarket hubs to save money.
- Labor rates and shop type: Dealerships usually charge more per hour than independent shops; rural areas may have lower rates than metropolitan areas.
- Vehicle year and drivetrain: AWD models and later Edge generations can require more labor or specialized hardware, raising costs slightly.
- Additional components or issues: ABS sensors, wheel speed sensors, or damaged brakes rotors may add to the bill if they need servicing or replacement.
- Diagnostic and shop fees: Some shops apply a diagnostic fee or a separate alignment charge after the bearing hub replacement.
In short, the final price reflects a combination of parts choice, labor time, and any ancillary services the shop must perform.
Typical cost ranges
Below are the common pricing bands you’ll encounter in the United States as of 2024–2025. These ranges are ballpark figures meant to help you plan and compare quotes.
- Hub assembly replacement (bearing-included hub): Most often priced per wheel, with parts typically $100–$350 and labor around $100–$250. The total per wheel commonly lands in the $300–$650 range, though many jobs fall between $300–$700 depending on location and options.
- Bearing-only replacement (when feasible without replacing the hub): Parts typically $60–$150; labor $150–$300; total roughly $210–$450 per wheel.
- AWD considerations: All-wheel-drive Edge models can incur extra labor or require more expensive hub assemblies, potentially pushing the total per wheel into the $400–$800 range in some cases.
- Additional services: ABS sensor work, wheel alignment, or rotor/brake service may add $50–$200 or more if needed after replacement.
Prices vary by region and shop, so it’s wise to obtain multiple quotes and ask specifically what’s included (hub vs bearing-only, OEM vs aftermarket, sensor handling, alignment) before authorizing work.
Tips for saving money and planning
To keep costs predictable, consider these practical steps: request quotes that itemize parts and labor, ask about warranty on the hub and bearing, check whether an alignment is included, and inquire about potential diagnostic fees upfront. If you’re comfortable with DIY basics, some owners install aftermarket hubs themselves, though this is typically recommended only for experienced hobbyists with the right tools and torque specs.
Summary
For a Ford Edge, expect the typical wheel bearing replacement cost to fall in the $300–$700 per wheel range, with variations driven by hub assembly vs bearing-only approaches, the vehicle’s drivetrain, parts quality, and regional labor rates. Always obtain multiple quotes, confirm what’s included, and factor in possible additional costs such as ABS sensor work or alignment. Planning ahead can help you avoid surprises when the repair bill arrives.
