Loading

How much does it cost to replace brakes on a Toyota Sequoia?

The cost to replace the brakes on a Toyota Sequoia can vary depending on several factors, but on average, it can range from $300 to $800 or more. This comprehensive guide will provide you with a detailed breakdown of the typical costs associated with brake replacement for this popular SUV.


Factors Affecting Brake Replacement Costs


The exact cost of replacing the brakes on a Toyota Sequoia can be influenced by the following factors:



  • Parts Needed: The cost of the brake pads, rotors, and other necessary components can vary depending on the quality and brand of the parts used.

  • Labor Costs: The labor required to replace the brakes, including the time it takes to remove and install the new parts, can significantly impact the overall cost.

  • Location: The geographic location and the prevailing labor rates in your area can also affect the total cost of the brake replacement.

  • Condition of the Brakes: If the brake components are severely worn or damaged, additional repairs or replacements may be necessary, further increasing the cost.


It's important to note that the cost can also vary depending on whether you choose to have the work done at a dealership, an independent mechanic, or if you decide to perform the brake replacement yourself.


Average Costs for Brake Replacement on a Toyota Sequoia


Based on the factors mentioned above, the typical cost range for replacing the brakes on a Toyota Sequoia is as follows:



  • Brake Pads: $100 to $300 per axle

  • Brake Rotors: $150 to $400 per axle

  • Labor Costs: $150 to $300 per axle

  • Total Cost: $300 to $800 or more, depending on the specific needs of your vehicle.


It's important to note that these are just estimates, and the actual cost may vary depending on your location, the specific parts needed, and the labor rates in your area.


Conclusion


Replacing the brakes on a Toyota Sequoia can be a significant expense, but it's a necessary maintenance task to ensure the safety and performance of your vehicle. By understanding the factors that can affect the cost, you can better prepare for the expense and make an informed decision about the best course of action for your Sequoia.

Is it more expensive to get brakes done at dealership?


Replacing brake pads at a dealership can be the most expensive option, with costs ranging from $500 to $1000 or more. Independent mechanics typically charge less, with prices ranging from $200 to $500.



How much does Toyota charge for a brake job per?


Brake pads for a Toyota can cost anywhere between $150 per axle and $450 per axle depending on the type of brake pad desired. Toyota Brake rotor replacement can cost anywhere between $300 - $750 for all four rotors to be replaced. This value estimate includes labor and parts.



How much do brake pads cost Toyota Sequoia?


2021 Toyota Sequoia Front Brake Pads Price
Typically the cost for components will range from $100-$200 per axle and labor can cost somewhere between $80 - $100. Since your 2021 Toyota Sequoia brake pads wear down at the same rate per axle, it is common to have your front or rear brake pads replaced at the same time.



How much does it cost to replace all 4 brake pads?


between $230 and $600
The average front brake pad replacement cost is between $115 and $300; this is about the same as the cost of rear brake pad replacement. The cost of replacing all four brake pads, including parts and labor, ranges between $230 and $600 for all four wheels.



How long do brakes last on a Toyota Sequoia?


between 30,000 and 70,000 miles
Toyota Sequoia brake pads usually last between 30,000 and 70,000 miles depending on your driving habits. If you commute in gigantic traffic and use your brakes commonly, you'll need to get an inspection more commonly.



How much do dealerships charge for brake change?


The cost of replacing brake pads can vary depending on where the work is being done. Replacing brake pads at a dealership can be the most expensive option, with costs ranging from $500 to $1000 or more. Independent mechanics typically charge less, with prices ranging from $200 to $500.



How much should a full brake job cost?


Each aftermarket rotor costs an average of $30 to $75. Labor to service brakes can run from $90 to $200 per hour. Brake service generally runs approximately $200 to $500 per axle at a professional center. Calipers are typically the most difficult and expensive aspect of the braking system to service.



Should I change all 4 brake pads and rotors?


Typically, you should have both your front brake pads replaced at the same time, and your rear pads replaced at the same time, to ensure proper braking power. Of course, to make it easier on yourself with one simple visit, rather than two to four visits, you may want to replace all four brake pads at the same time.



How to tell if rotors are bad?


Some common symptoms of bad rotors include vibration or pulsation in the steering wheel, high-pitched squealing noise when braking, shaking steering wheel, brake pedal pulsing, vehicle taking a long time to stop, loud bangs while braking, large edges on the outer part of the brake rotor, and scratch marks on the rotor.



How long do Toyota factory brakes last?


The typical brake pad will last around 40,000 miles on average, although its actual parameters are a lot more extensive than that. Generally speaking, a brake pad can last from 20,000 to 65,000 miles.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.