Loading

How much fluid does a Ford F150 transfer case hold?

The Ford F150 transfer case typically holds between 1.5 to 2 quarts of fluid, depending on the specific model and year of the vehicle. The transfer case is a critical component in four-wheel-drive and all-wheel-drive systems, responsible for distributing power from the transmission to the front and rear axles.


Understanding the Ford F150 Transfer Case


The transfer case in a Ford F150 is designed to provide the necessary power distribution for the vehicle's four-wheel-drive or all-wheel-drive capabilities. It is located between the transmission and the front and rear axles, and its primary function is to split the engine's torque between the front and rear wheels, allowing the vehicle to navigate various terrain and driving conditions.


The transfer case fluid is essential for the proper lubrication and operation of the internal components, such as gears, bearings, and synchronizers. Maintaining the correct fluid level and condition is crucial for the long-term health and performance of the transfer case.


Fluid Capacity and Replacement



  • The typical fluid capacity for a Ford F150 transfer case ranges from 1.5 to 2 quarts, depending on the specific model and year of the vehicle.

  • It is recommended to check the transfer case fluid level regularly, as per the manufacturer's maintenance schedule, and top it up if necessary.

  • The transfer case fluid should be replaced at the intervals specified in the owner's manual, typically every 30,000 to 60,000 miles, or as recommended by the manufacturer.

  • Using the correct type and quality of transfer case fluid is essential, as specified by Ford. Mixing different fluids or using an incorrect type can lead to damage and premature wear of the transfer case components.


Proper maintenance of the Ford F150 transfer case, including regular fluid checks and timely replacements, is crucial for ensuring the long-term reliability and performance of the vehicle's four-wheel-drive or all-wheel-drive system.

How much transfer case fluid does a 2002 Ford F150 hold?


On the 2002 Ford Truck F150 Super Crew 4WD with the V8-5.4L SOHC engine, the transfer case fluid is Mercon ATF. The capacity is 2 quarts. The rear differential fluid is 75W-140. The capacity is 2.7 quarts.



What fluid should I run in my transfer case?


Most transfer cases are filled with an automatic transmission fluid, which is usually red in colour. Others use a thicker gear oil, and some use a specialized fluid that is specifically made just for that transfer case.



What happens if you don't change transfer case fluid?


Not changing fluids when they are due can cause premature failure. Unlike the engine and automatic transmissions the transfer case does not have a filter on it to capture dirt and metal particals so changing the fluid is the only way to remove the dirt and metal particals.



How much fluid goes in a Ford transfer case?


Ford Full Size 4x4 Transfer Case Fluids

Year RangeModelCapacity
2009-2011F150
2009-2015F1503.0 Pints
2010-2015F1503.0 Pints
2017-upF-Super Duty3.8 Pints



How often should you change transfer case fluid F150?


every 30,000 to 60,000 miles
How Often Should You Replace It? The general guideline suggests replacing transfer case fluid every 30,000 to 60,000 miles. However, this range isn't set in stone.



How do I know if my F 150 transfer case is bad?


6 Signs of a Damaged Transfer Case

  1. Trouble Shifting.
  2. Slipping Out of 4WD.
  3. 4WD Won't Engage/Disengage.
  4. Fluid Leak.
  5. 4WD/AWD Warning Light.
  6. Grinding, Growling or Humming.



How many quarts of transfer case fluid do I need?


Transfer Case Fluid Capacity and Specification (If Equipped)

VariantQuantity
All.1.9 qt (1.8 L)



How many quarts of transmission fluid does a 2003 F150 hold?


For Automatic Transmission: 4R70W....MA5

Capacity:5 quarts Initial Fill.
Capacity:4 speed 4R70W Total Fill 13.9 quarts.



How much fluid does a 2012 f250 transfer case hold?


Transfer case: 2 quarts for the 2011-2016 models and 1.9-2 quarts for 2017-2020.



Do I really need to change transfer case fluid?


When to Replace Transfer Case Fluid. The general recommendation is to replace the transfer case fluid every 30,000 to 60,000 miles. However, it's crucial to consult your vehicle's owner manual for the manufacturer's specific interval. The frequency of replacement may vary depending on your driving conditions.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.