How much freon does a 2013 Ford Explorer 3.5 take?
The 2013 Ford Explorer 3.5 requires approximately 28-32 ounces (0.88-1 liter) of R-134a refrigerant, commonly known as Freon, to fully charge the air conditioning system. This amount can vary slightly depending on factors such as the specific model year, engine size, and whether the vehicle has been serviced previously.
Detailed Explanation
The 2013 Ford Explorer is a mid-size SUV that was produced by the Ford Motor Company. The 3.5-liter engine was one of the available engine options for this model year. The air conditioning system in the 2013 Explorer uses R-134a refrigerant, which is the standard refrigerant used in most vehicles manufactured after the mid-1990s.
According to the Ford service information, the recommended refrigerant charge for a 2013 Ford Explorer 3.5 is between 28-32 ounces (0.88-1 liter) of R-134a. This amount is typical for a vehicle of this size and engine configuration. It's important to note that the exact amount may vary slightly depending on factors such as the specific model year, whether the vehicle has been serviced before, and environmental conditions.
Refilling the Refrigerant
When refilling the air conditioning system in a 2013 Ford Explorer 3.5, it's crucial to use the recommended R-134a refrigerant and the proper amount. Overfilling or underfilling the system can lead to various issues, such as reduced cooling performance, compressor damage, or even system failure.
- Use a professional-grade refrigerant recovery and recharging machine to properly evacuate the old refrigerant and recharge the system with the correct amount of new R-134a.
- Refer to the vehicle's service manual or the information label located in the engine bay for the specific refrigerant charge amount and any other relevant service information.
- If unsure about the process or the amount of refrigerant required, it's best to consult a qualified automotive technician to ensure the system is properly serviced.
Maintaining the correct refrigerant charge in the air conditioning system is essential for optimal performance and longevity of the components. Following the manufacturer's recommendations and using the proper tools and procedures will help ensure the 2013 Ford Explorer 3.5 air conditioning system continues to function effectively.
How much freon does a 3.5 ton AC take?
According to PG&E, most central air conditioning systems use two to four pounds of refrigerant per ton of cooling capacity. A three-ton air conditioner would typically have six to 12 pounds of refrigerant for a proper charge.
How much freon do I need to refill?
It is essential to ensure enough refrigerant in your air conditioner, as too little can cause the system to work less efficiently, and too much can be dangerous. The general guideline used when calculating the amount of Freon in a residential A/C unit is 2-4 pounds per ton of cooling.
How many cans of freon does a SUV take?
Most cars hold between 28 and 32 ounces of refrigerant (or about 2—3 12oz cans), however larger vehicles and those with rear A/C will likely hold more. Check your vehicle manual for the system capacity for your specific vehicle.
How much freon does a 2013 Ford Explorer hold?
The proper amount of freon on your 2013 Explorer with the Dual climate control system calls for the 2.56 lbs. (41 ounces) of 134 A freon.
What kind of freon does a Ford Explorer take?
Ford refrigerant filling quantities R134a and 1234yf
| Model | Year of manufacture | Freon |
|---|---|---|
| Ford Focus III 1.6Ti-VCT/1.6SCTi/2.0TDCi | 2011 - 2014 | R134a |
| Ford Explorer (U2) 4.0iV6 | 03.1995 - 1998 | R134a |
| Ford Fiesta | 1999 - 2002 | R134a |
| Ford Fiesta VI 1.25i/ 1.4i/ 1.6Ti | 2008 - 2013 | R134a |
How much freon does a 2013 F150 hold?
Capacities and Specifications - 5.0L
| Item | Capacity |
|---|---|
| Fuel tank (Optional) | 36.0 gal (136.3 L) |
| A/C Refrigerant (U.S. and Canada) | 29 oz (0.82 kg) |
| A/C Refrigerant (Mexico) | 31 oz (0.88 kg) |
| A/C Refrigerant Compressor Oil | 2.7 fl oz (80 ml) |
How much cooling capacity does a 3.5 ton AC have?
approximately 2,500 to 3,000 square feet
However, as a rule of thumb, a 3.5-ton AC unit can cool approximately 2,500 to 3,000 square feet of space. It is important to note that the actual cooling capacity can depend on various factors, such as the insulation of the space, the climate, the ceiling height, and the number of windows or doors in the area.
How many 12 oz cans of freon equal a pound?
Weighing in at a 14.7 grams per can, you will need 32 cans per pound.
How many ounces of R-134A do I need?
Do not use more than 24 oz. of 134A refrigerant! 1.5 lbs. or 24 oz of R134A is what is required. Hand-turn the compressor 15-20 times after charging!
How much R134A refrigerant is required?
All new compressors from Classic Auto Air contain a full system charge of oil. Do not use more than 24 oz. of 134A refrigerant! 1.5 lbs. or 24 oz of R134A is what is required.
