How much horsepower does a 1987 Chevy s10 have?
The 1987 Chevy S10 pickup truck was available with a range of engine options, each producing a different amount of horsepower. The specific horsepower output for a 1987 Chevy S10 depends on the engine configuration, but generally falls within a certain range.
Engine Options and Horsepower
The 1987 Chevy S10 was offered with the following engine options:
- 2.5L inline 4-cylinder engine: 92 horsepower
- 2.8L V6 engine: 110 horsepower
- 4.3L V6 engine: 155 horsepower
The most common engine choice for the 1987 Chevy S10 was the 2.8L V6, which produced 110 horsepower. This engine provided a good balance of power and fuel efficiency for the compact pickup truck.
Factors Affecting Horsepower
The horsepower output of a vehicle's engine can be influenced by several factors, including the engine displacement, number of cylinders, fuel delivery system, and other design elements. Automakers may also tune engines differently for various model years, leading to slight variations in horsepower even for the same engine configuration.
It's important to note that the horsepower figures provided are the manufacturer's rated output, and actual performance may vary depending on the specific vehicle, driving conditions, and other factors.
What is a 1987 Chevy V10 worth?
Typically, you can expect to pay around $12,950 for a 1987 Chevrolet V10 Suburban Custom Deluxe in good condition with average spec.
What does C10 stand for Chevy?
The “C” in C10 specifies that a particular truck is a two-wheel drive model. On the other hand, trucks that were equipped with four-wheel-drive were identified with the letter “K”. The two-wheel-drive half-ton variation within the C/K lineup was designated as the C10 while the four-wheel-drive version was dubbed K10.
Are a 7.4 and a 454 the same engine?
Chevy's 7.4L (454 ci) big-block engine was offered in many production vehicles from 1970 to 2001 and is still available today as a crate variant. Much of the engine's popularity stems from its impressive horsepower and torque output and solid reliability.
How much horsepower does a 1987 5.0 have?
225
| 1987 Mustang Engines | ||
|---|---|---|
| Engine | HP | TQ |
| 2.3L I-4 | 89 | 120 |
| 5.0L 2V HO V8 | 225 | 300 |
How much can a 1987 Chevy V10 tow?
V10: 6,100 lbs. V20: 6,600 lbs. and 8,600 lbs. V30: 9,200 lbs.
How much horsepower does a 1987 454 have?
255 hp
General Motors introduced EFI in 1987, which was found on GM C1500 SS, C/K2500, and C/K3500 trucks. The 454 EFI version was rated from 230 hp (172 kW) to 255 hp (190 kW) and from 385 lb⋅ft (522 N⋅m) to 405 lb⋅ft (549 N⋅m) of torque.
What does S-10 stand for?
S10, SB9, SM10 are para-swimming classifications used for categorizing swimmers based on their level of disability. Swimmers in this class tend to have minimal weakness affecting their legs, missing feet, a missing leg below the knee or problems with their hips.
How much horsepower can I get out of a 4.3 V-6?
That'll get you to around 340-350 hp.
How much horsepower does a 4.3 S-10 have?
A 4.3 L V6 (which was optional on regular S-10s) was the standard engine used in the SS, producing between 180 and 200 hp (149 kW).
How much horsepower does a 1987 S-10 have?
MMP Rating
| Engine Specifications | |
|---|---|
| Horsepower: | 92-125 hp |
| Torque: | 130-150 lb-ft |
| Compression Ratio: | 8.2:1 (2.5L), 8.5:1 (2.8L) |
| Ignition System: | Electronic |
