How much horsepower does a 3.6 L VVT Dodge Charger have?

The 3.6 L VVT Dodge Charger typically delivers about 292 horsepower.

This figure comes from the 3.6-liter Pentastar V6 with variable valve timing, which powers most recent Charger trims in the U.S. market. It’s usually paired with an eight-speed automatic transmission and offered in rear- or all-wheel-drive configurations depending on the model. Horsepower can vary slightly by year, market, and emissions calibration, but 292 hp is the standard benchmark for contemporary Chargers equipped with this engine.

Engine at a glance

The 3.6 L VVT is part of Chrysler’s Pentastar family. It produces 292 horsepower at about 6,350 rpm and around 260 lb-ft of torque at roughly 4,800 rpm. In most Charger configurations, this engine is teamed with an eight-speed automatic transmission, delivering a balance of everyday practicality and steady acceleration.

Year-to-year context

Across recent model years, Dodge has consistently listed the 3.6 L VVT engine’s output as 292 hp for the Charger. Some earlier 2010s versions or regional market variants documented slightly different numbers due to calibration or measurement standards, but the widely cited, current-spec figure remains 292 hp for the U.S.-spec Chargers.

How to verify for your specific car

To confirm the exact horsepower for your vehicle, check the window sticker or the official spec page for your model year and trim. Variations can occur if the car has different emissions packages, drivetrain configurations (RWD vs. AWD), or special calibrations.

Summary

Short answer: 292 horsepower is the standard figure for the 3.6 L VVT Dodge Charger in modern configurations. The engine delivers about 260 lb-ft of torque and is typically paired with an eight-speed automatic transmission, with exact numbers varying slightly by year and market. For precise figures, reference your vehicle’s window sticker or official spec sheet.

How much HP does a 3.6 VVT have?

A 3.6L V6 VVT engine's horsepower varies depending on the manufacturer, but it typically ranges from 280 to 310 horsepower, with some variations like the Chrysler Pentastar producing up to 305 hp and GM's version reaching 302 hp or more in specific applications. For instance, the GM High Feature engine is listed as producing 302 hp, while the Chrysler Pentastar is rated at 305 hp in the Ram 1500.
 
You can watch this video for a detailed explanation of the Jeep Grand Cherokee's 3.6L Pentastar V6 engine: 57sTDTVGarageYouTube · May 4, 2024

• General Range: The 3.6L V6 VVT engine generally produces between 280 and 310 horsepower, depending on the specific make and model. 
• Chrysler Pentastar: This engine, found in a wide range of Chrysler, Dodge, Jeep, and Ram vehicles, produces between 280 and 305 horsepower. For example, it is rated at 305 hp in the Ram 1500. 
• GM High Feature engine: This engine can produce a range of horsepower ratings. For example, the LLT version is SAE-certified for up to 302 hp, while later versions in some SUVs produce up to 288 hp. 
• Other applications: Horsepower ratings will differ based on the vehicle and tune. For example, a Jeep Wrangler's 3.6L V6 engine is rated at 285 hp. 

This video discusses the specifications and potential issues of the Chrysler 3.6L Pentastar V6 engine: 59sMarspeedYouTube · Apr 5, 2021

How much horsepower does a 3.6 L Dodge Charger have?

The 3.6L Pentastar V6 engine in a Dodge Charger produces either 292 horsepower or 300 horsepower, depending on the model. The standard output is 292 hp for the SXT trim, while the GT trim and SXT AWD models get an extra 8 hp, resulting in a total of 300 hp.
 

• Standard Power: 292 horsepower on the SXT trim. 
• Upgraded Power: 300 horsepower on the GT and SXT AWD trims. 
• Torque: The engine produces up to 264 lb-ft of torque. 
• Transmission: It comes paired with a standard TorqueFlite eight-speed automatic transmission. 

What engine is 292 hp 3.6 l V6?

The 2020 Dodge Charger SXT combines classic American muscle styling with modern comfort and technology. It comes standard with a 3.6-liter Pentastar V6 engine that produces 292 horsepower and 260 lb-ft of torque, paired with an 8-speed automatic transmission.

What does 3.6 L VVT mean?

"3.6L VVT" means a 3.6-liter engine with variable valve timing. The "3.6L" refers to the engine's displacement—a measure of its internal volume—while "VVT" signifies a technology that optimizes performance, fuel economy, and emissions by adjusting when the engine's intake and exhaust valves open and close.
 
This video explains the concept of variable valve timing: 25sCNETYouTube · Apr 28, 2014

• 3.6L: This indicates the engine's size. A larger displacement generally means the engine can produce more power. In this case, it's a 3.6-liter V6 engine. 
• VVT: This stands for Variable Valve Timing. 
  • It's a technology that continuously adjusts the timing of the intake and exhaust valves. 
  • This allows the engine control unit to fine-tune valve events for different driving conditions, such as optimizing for power at higher speeds or for fuel efficiency at lower speeds. 
  • The benefits include improved performance, better fuel economy, and reduced emissions. 

You can watch this video to learn how variable valve timing works in an engine: 58sspeedkar99YouTube · Nov 9, 2017