How much horsepower does a 5.7 Daytona have?
The horsepower of a “5.7 Daytona” depends on which car and which era you mean. There isn’t a single, universal figure. Classic Daytonas used big-block V8s with horsepower in the 400s, while modern Daytona editions built around a 5.7-liter Hemi typically sit in the mid- to high-300 horsepower range. The exact number varies by year, model, and options.
Historical context of the Daytona name
The Daytona badge has traveled through Mopar history, signaling high performance but with different engines across generations. In the late 1960s and early 1970s, Daytonas were aerodynamic variants of Mopar muscle cars that could be equipped with either a high-winding Hemi or a potent 440 with Six-Pack carburation. Today, the Daytona label has reappeared on modern Dodge performance trims that use the 5.7-liter Hemi, focusing as much on handling and aero as raw horsepower.
Classic Daytonas (1969–1970)
Before listing the typical power outputs, note that the engines and ratings from this era were measured differently than later standards, and output could vary by specific configuration.
- 426 cubic inch Hemi V8 — about 425 horsepower (SAE gross rating at the time)
- 440 cubic inch Six-Pack (three two-barrel carburetors) — about 390 horsepower (SAE gross; actual output depended on rating method)
Historical horsepower figures from this era reflect the old SAE gross standard, which tends to be higher than modern net ratings. The modern numbers you’ll see on current brochures or apps are typically lower due to emissions and testing standards.
Modern 5.7L Hemi Daytona editions
In contemporary Mopar catalogs, Daytona editions are usually built around the 5.7-liter Hemi V8. Power figures are generally in the mid-300s, and exact numbers depend on year, drivetrain, exhaust, and emissions equipment.
- Typical 5.7L Hemi in Daytona-equipped trims — roughly 370 horsepower and about 410 lb-ft of torque (with some variation by year and configuration)
- Representative ranges across modern Daytona editions — about 360–375 horsepower, with torque in the ~410–420 lb-ft range depending on options
Because the Daytona name has been reused across different generations and models, the precise horsepower can vary. For an exact figure, check the official specification sheet for the exact model year and trim in question.
Summary
There isn’t a single horsepower figure for a "5.7 Daytona." Classic Daytonas with big-block engines produced about 425 hp (Hemi) or 390 hp (Six-Pack) under older rating standards, while modern Daytona editions with a 5.7-liter Hemi generally deliver around 370 hp, with exact numbers dependent on year and options. If you’re evaluating a specific car, refer to its official spec sheet for the definitive number.
Is there a 5.7 Daytona?
In the US market, where it is most popular, it features a choice of either a 5.7 L or 6.4 L V8. In Canada, the Charger Daytona is only available with the 5.7 L V8.
How much HP does a 5.7 Daytona charger have?
The 5.7L HEMI V8 in a Dodge Charger R/T Daytona produces 370 horsepower and 395 lb-ft of torque. This engine, paired with an 8-speed automatic transmission, offers performance features like a Mopar cold air intake, a functional hood scoop, Bilstein performance suspension, and a higher top speed of 150 mph compared to the standard R/T.
You can watch this video to see a POV drive of the 2022 Dodge Charger Daytona, including an under the hood view: 52sAuto CentricYouTube · Apr 27, 2023
- Engine: 5.7L HEMI V8
- Horsepower: 370 hp @ 5,250 rpm
- Torque: 395 lb-ft @ 4,200 rpm
- Transmission: 8-speed automatic
- Key Daytona features:
- Mopar cold air intake
- Functional hood scoop
- Bilstein high-performance suspension
- 2.62 rear axle ratio
- High-speed engine controller (150 mph top speed)
- 0-60 mph: Approximately 5.1 seconds (for the 2017 model)
Is a Daytona faster than a RT?
Is the Dodge Charger RT or Daytona faster? The Charger RT is a fast car that makes 370 horsepower, but the upcoming Charger Daytona EV is set to be even faster, since its weakest form should arrive with 455 horsepower.
How much HP will a supercharger add to a 5.7 Hemi?
Installing a ProCharger supercharger is an easy way to add up to 160 horsepower to a 5.7 HEMI without taking out a second mortgage on your house.
