How much horsepower does a Cressida 3.0 have?
The 3.0-liter Cressida typically produces about 180 horsepower, but the exact figure varies by model year, market, and engine variant.
The Toyota Cressida used a 3.0-liter inline-6 across several generations and engine codes, notably variants of the 5M-GE and 7M-GE. Output depends on factors such as compression, emissions equipment, and fuel-management tuning. Understanding the precise horsepower for a given car means identifying the exact engine code and year.
Engine options and horsepower ranges
The 3.0L inline-6 found in Cressidas appeared in multiple configurations. Below are typical ranges you might encounter by engine type and market.
- 5M-GE (3.0 L DOHC 24V) — commonly listed around 160–170 horsepower in mid- to late-1980s models, with some regional versions creeping toward 180 hp in later revisions or higher-compression setups.
- 7M-GE (3.0 L DOHC 24V) — used in some higher-spec or later-market Cressidas; horsepower commonly falls in the ~190–210 hp range, depending on year and emission requirements, with peak figures in more performance-tuned or less emissions-strangled variants.
Note: Horsepower figures vary significantly by year, market, and the presence of features like variable valve timing or stricter emissions controls. Always confirm the exact spec for a specific vehicle using the VIN or official brochures.
Conclusion: For a Cressida equipped with a 3.0-liter engine, expect roughly 160–210 horsepower depending on the exact engine code and market, with most standard configurations landing in the high 170s to low 200s.
Summary
The Cressida 3.0’s horsepower is not fixed. Most 3.0L Cressidas sit in the 170–200 hp range, while certain variants and markets push toward the upper end of that spectrum. If you’re evaluating a specific car, verify the exact engine code (such as 5M-GE or 7M-GE) and consult the vehicle’s documentation or VIN to confirm the precise horsepower rating.
