How much HP can a Honda Fit make?
The Honda Fit typically makes about 130 horsepower in its latest generation, with older models commonly producing around 117–122 horsepower depending on year and market. With aftermarket modifications, you can push power higher, but results vary and usually require additional upgrades.
This article offers a clear look at stock horsepower across generations, what affects these numbers, and common ways owners increase power, along with practical considerations for reliability, warranty, and everyday driving.
Stock horsepower by generation
Below is a concise guide to typical stock horsepower by generation and major markets. Exact figures depend on trim, transmission, and regional tuning.
- Third-generation Fit (2015–2020; US/Global): 130 hp from the 1.5L i-VTEC engine.
- Second-generation Fit (2009–2014): About 117–122 hp from the 1.5L engine, depending on market and transmission.
- First-generation Fit (2007–2008 US; Jazz in other markets): About 117 hp from the 1.5L engine.
In Europe and some Asian markets, numbers are similar but can vary slightly due to emissions tuning and standard equipment.
How to increase horsepower on a Honda Fit
For enthusiasts, there are several ways to increase horsepower, each with different costs, risks, and results. The following approaches outline common paths and typical power gains observed by owners and tuners.
- Intake and exhaust upgrades (cold-air intake, high-flow exhaust): often +5–20 hp combined, depending on quality and condition.
- ECU remap or performance tuner: typically +10–25 hp, especially when paired with upstream mods.
- Camshaft and valvetrain improvements or higher-compression tuning: modest gains possible, often +5–15 hp depending on setup.
- Forced induction (turbocharger or supercharger) with supporting upgrades: commonly +100–200+ hp above stock, but requires fuel system, cooling, transmission, and engine tuning upgrades and professional installation.
- Engine swaps or major rebuilds can yield much higher power but are complex and expensive.
Before pursuing power gains, consider budget, intended use, and the potential impact on reliability, warranty, and insurance costs.
Practical considerations and real-world expectations
Increasing horsepower requires balancing cooling, fueling, and drivetrain durability. Power boosts can affect fuel economy and emissions, and may necessitate professional installation to avoid engine damage. Always check local regulations and warranty terms before modifying your vehicle.
Summary
In short, a modern Honda Fit typically delivers around 130 horsepower, with older models around 117–122 hp depending on market. Power gains from bolt-ons and tuning are possible, and substantial increases require careful planning, investment, and respect for reliability and warranty considerations. For most daily drivers, stock horsepower provides ample performance, while enthusiasts pursuing peak speed should work with qualified tuners to find a balanced setup.
