How much is a clutch for a Ford Fusion?
Most Ford Fusions use automatic transmissions and don’t have a traditional clutch to replace. If your specific model has a manual transmission, a clutch replacement typically costs about $800 to $1,800, depending on parts and labor.
Clutch availability and what it means for your Fusion
Ford produced both manual and automatic versions of the Fusion across various model years. The automatic transmissions use a torque converter rather than a traditional clutch, so there isn’t a standard “clutch kit” to replace on those models. Manual transmissions, while less common in later years, do require a clutch kit and related components when worn or failing. Understanding which transmission your car has is essential before budgeting for repairs.
Manual vs automatic transmissions
In manual Fusions, expect to replace the clutch disc, pressure plate, throw-out bearing, and a pilot bearing, with the possible need to replace or resurfaced the flywheel. In automatics, the failure may involve the torque converter, transmission service, or other related parts, but not a traditional clutch kit.
Cost considerations for replacing a clutch depend on several factors that can influence the final bill.
Cost factors that influence the price
Before listing typical price ranges, it helps to know what drives the final cost for a clutch replacement on a Ford Fusion.
- Transmission type and model year
- Parts quality: OEM (dealer) vs aftermarket vs remanufactured
- Flywheel condition: resurfacing vs replacement
- Labor rate and location (geographic variation)
- Additional components: pilot bearing, release/throw-out bearing, slave cylinder, hydraulic lines, and any related seals or seals
Because these variables can shift prices considerably, getting multiple quotes from reputable shops is advisable.
Typical price ranges you can expect
The figures below illustrate common ranges for a manual clutch replacement on a Ford Fusion. They cover parts, labor, and typical scenarios, but actual prices will vary by year, model, and location.
- Clutch kit (manual): roughly $200 to $500
- Flywheel: resurfacing about $60 to $120, or a new flywheel about $350 to $600
- Labor: about 4 to 8 hours at $80 to $150 per hour (roughly $320 to $1,200)
- Additional components (pilot bearing, slave cylinder, hydraulics, seals): $50 to $400
Combined, a typical manual clutch replacement tends to run about $800 to $1,800. If the flywheel needs replacement and you add extra repairs, the total can climb toward $2,400 or more. For automatic Fusions, there is no standard clutch to replace, though other transmission service costs may apply.
What to expect in the repair shop
Shop estimates will itemize parts and labor separately, and they may differ based on whether the flywheel is resurfaced or replaced, and whether additional components are needed. Expect to sign off on the scope of work before any major disassembly, and be prepared for a multi-hour service visit, especially if you are navigating shop scheduling or parts availability.
Ways to save and quality considerations
To manage costs without compromising safety or reliability, consider the following:
- Obtain multiple quotes from independent shops and Ford dealerships for comparison.
- Ask for a full breakdown of parts (OEM vs aftermarket) and whether the flywheel will be resurfaced or replaced.
- If you have a manual transmission and the flywheel is included, request a discount if both clutch and flywheel are needed.
- Ensure the shop includes a transmission fluid check or flush if applicable, and a pressure test after reassembly.
- Look into remanufactured or certified used components only if you understand the warranty implications.
Choosing a shop with proven experience on Ford manual transmissions can help ensure the job is done correctly and potentially reduce the likelihood of future clutch-related issues.
Summary
In short, most Ford Fusions use automatic transmissions, which do not require a traditional clutch replacement. If you own a manual-transmission Fusion, plan for a typical clutch replacement cost in the range of $800 to $1,800, with higher totals possible if the flywheel must be replaced or additional parts are needed. Prices vary by year, model, part quality, labor rates, and location, so shopping around and confirming the exact scope of work is essential. Note that Ford ended production of the Fusion in 2020, so parts can be sourced from a mix of dealers, aftermarket suppliers, and remanufacturers.
Is replacing a clutch a big job?
Replacing a worn clutch can be a significant job as it requires removing the gearbox to access the clutch assembly. The process can be complex, and it may require specialised tools and expertise to complete the task efficiently.
Is a clutch expensive to replace?
Professional clutch replacement can be $1000-2000 depending on the make/model and drive type. FWD cars are more expensive to replace. It takes a lot of tools, knowledge, skill, and patience, but if you were to tackle yourself (preferably with a buddy) it could be closer to $300-600.
How much does it cost to replace a clutch in a 2010 Ford Fusion?
The average cost for a Ford Fusion Clutch Replacement is between $1,277 and $1,715. Labor costs are estimated between $936 and $1,373 while parts are priced between $341 and $342. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
How much is a new clutch for a Ford Fusion?
Ford Fusion Clutch Replacement cost
| Name | Independent garage estimate | |
|---|---|---|
| Ford Fusion 1.4 2010 Part brands: FTE, Ford, LUK Parts costs: £186 - £223 Labour time: 3-4 hours | £378 - £418 | Get exact price |
| Ford Fusion 1.6 2009 Part brands: FTE, Ford, Valeo Parts costs: £207 - £248 Labour time: 3-4 hours | £399 - £441 | Get exact price |
