How much oil does a 1.4 diesel Ford Fiesta take?
The Ford Fiesta 1.4 diesel, typically the 1.4 TDCi, commonly requires about 3.8 liters of engine oil for a full oil change with a new filter. If you are draining and refilling without changing the filter, plan for roughly 3.0–3.3 liters. Exact capacity can vary by model year and market, so check the owner’s manual or Ford service data for your specific car.
Here we break down the typical capacities and what affects them, so you can plan oil changes with confidence across common Fiesta 1.4 diesel variations.
Typical oil capacity by variant
Before listing the figures, note that capacities vary depending on the exact engine variant, year, and whether the oil filter is replaced during the service. The numbers below reflect common specifications seen in many Fiesta 1.4 TDCi models.
- Approximately 3.8 liters (about 4.0 quarts) of engine oil for a full oil change with a new filter.
- Approximately 3.0–3.3 liters if performing an oil change without replacing the filter.
- Always confirm with the official manual or service data for your specific vehicle, as regional variations exist.
In practice, the exact amount you need depends on whether the filter is changed and on any regional service bulletins. When in doubt, err on the side of adding slightly less oil first, then topping up to the correct level after running the engine and checking the dipstick.
How to verify the correct oil level
To ensure you’ve added the right amount, follow these steps after an oil change:
- Park on level ground and let the engine cool for a few minutes after idling or running.
- Wipe the dipstick, reinsert fully, then pull it out to check where the oil sits between the minimum and maximum marks.
- If the level is low, add small increments (about a quarter to half a liter), wait a few minutes, and recheck until it sits within the correct range.
Note: Overfilling can cause engine problems, so precision matters. Use the correct grade of oil as specified in the owner’s manual (often a fully synthetic 5W-30 or 5W-40, depending on market and year) and replace the oil filter during the change.
Why capacity varies and what to do about it
Engine oil capacity variations arise from differences in engine timing, oil filter size, and regional service practices. If you have a different 1.4 diesel variant (for example, a variant with a different turbo or emissions system), the capacity might shift slightly. Always use the vehicle’s exact specification from the manual or your dealer if you want to be absolutely precise for your car’s production year and market.
The key takeaway is that a typical full oil change on a Ford Fiesta 1.4 TDCi uses about 3.8 liters of oil including the filter, with the option to manage around 3.0–3.3 liters if you’re not replacing the filter.
Summary
For a Ford Fiesta 1.4 diesel, plan on roughly 3.8 liters of engine oil for a complete change with a new filter, and around 3.0–3.3 liters if the filter isn’t replaced. Always verify exact capacity with the owner’s manual or Ford service data for your specific model year and region, and follow the recommended oil grade and refilling procedure to ensure optimal engine health.
How much oil does a Ford Figo 1.4 diesel engine take?
For the Ford Figo diesel engine, the oil capacity is 1.4 litres.
How much oil does a Ford Fiesta 1.4 diesel take?
Capacities
| Variant | Item | Capacity in Litres (gallons) |
|---|---|---|
| 2.0L Duratec | Engine cooling system | 6.7 (1.5) |
| 1.4L Duratorq-TDCi | Engine lubrication system - including the oil filter | 3.8 (0.8) |
| 1.4L Duratorq-TDCi | Engine lubrication system - excluding the oil filter | 3.4 (0.8) |
| 1.4L Duratorq-TDCi | Engine cooling system | 5.5 (1.2) |
What is the life expectancy of a Ford Fiesta 1.4 diesel?
The estimated lifespan of a Ford Fiesta is 146,000 miles, before reaching the life expectancy upper limit.
What kind of oil does a 2010 Ford Fiesta 1.4 TDCi take?
4 LITRES FULLY-SYNTHETIC ENGINE OIL 5W30 913D FORD SPEC.
