How much oil does a 200 Series take?
The oil capacity for a Toyota Land Cruiser 200 Series depends on which engine it uses. In general, the petrol 4.6L V8 requires about 6.5–7.0 quarts (roughly 6.0–6.5 liters) of engine oil with a filter, while the diesel 4.5L V8 turbodiesel needs roughly 10–11 quarts (about 9.5–10.5 liters). Exact figures can vary by model year and market, so always check the owner's manual or your dealer for your specific VIN.
Engine options and typical oil capacities
To help readers understand common figures, here are the typical capacities for the two main engines used in the 200 Series. These include the engine oil filter; exact numbers may vary slightly by year and market.
- Petrol engine: 1UR-FE 4.6L V8 — typically about 6.9 quarts (6.5 liters) of engine oil, including the filter. Without the filter, roughly 6.0 quarts (5.7 liters).
- Diesel engine: 1VD-FTV 4.5L V8 turbodiesel — typically about 10.5–11.0 quarts (10.0–10.5 liters) with the filter. Without the filter, around 9.0–9.5 quarts (8.5–9.0 liters).
Note: These numbers provide practical guidance. Market-specific engines and model years may use different capacities. Always verify in the official manual or with a Toyota service center for your exact vehicle.
How to confirm the exact capacity for your vehicle
To ensure you have the correct oil quantity, locate the exact specification for your model year and engine code in the owner's manual. When changing oil, use the dipstick to confirm that you’ve reached the proper level after warming the engine, and top off gradually if needed to stay within the recommended range.
Summary
Oil capacity on the Land Cruiser 200 Series varies by engine: roughly 6.5–7.0 liters for the petrol 4.6L V8 and about 9.5–10.5 liters for the diesel 4.5L V8. Always consult the official manuals or a dealer for your precise figure based on year, market, and VIN.
How many quarts of oil does a 2000 Land Cruiser take?
Oil Grade: SL
| Viscosity: | 10W-30 (Above -18°C) 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 7.2 quarts (with filter). After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) |
How many quarts of oil does a 4.0 inline 6 take?
Six cylinder engines which is what this is this is a 4.0 uh they want six quarts of oil which is 5.68 L of oil guys. So these jugs are 5 L.
What kind of oil does a Chrysler 200 2.4 L take?
The recommended oil for a Chrysler 200 is SAE 5w-20, particularly the full synthetic variant.
How much oil does a 5.7 L V8 engine take?
7 quarts
7 quarts, must run and cycle thru the oil filter.
