How much oil does a 2004 Ford Falcon take?
The 2004 Ford Falcon typically requires 5 quarts (4.7 liters) of engine oil. This is the standard oil capacity for the 4.0-liter inline-six engine found in the 2004 Falcon models.
Detailed Oil Capacity Information for the 2004 Ford Falcon
The 2004 Ford Falcon was available with a 4.0-liter inline-six engine. This engine has an oil capacity of 5 quarts or 4.7 liters. It's important to use the recommended oil type and viscosity grade specified by Ford for this vehicle, which is typically 5W-30 or 5W-20 synthetic blend motor oil.
When changing the oil in a 2004 Ford Falcon, you'll need to:
- Locate the oil drain plug, usually on the bottom of the oil pan, and drain the old oil
- Replace the oil filter
- Pour in 5 quarts (4.7 liters) of the recommended motor oil
- Check the dipstick to ensure the oil level is at the full mark
It's a good idea to check your owner's manual or consult with a Ford dealership or certified mechanic to confirm the exact oil capacity and specifications for your 2004 Ford Falcon model.
How much oil does a 4.0 Ford Falcon take?
Maintaining your Ford Falcon's engine is crucial, and a key aspect of that is knowing the correct oil capacity. For the 6-cylinder engines in the Ford Falcon BA, BF, FG, and FGX models, the engine oil capacity is 6.8 litres.
How much oil does BF Falcon take?
6.8 litres
For the Ford Falcon BA, BF, FG, and FGX models equipped with a 6-cylinder engine, the engine oil capacity is consistently 6.8 litres.
How does a falcon go so fast?
Peregrine falcon: 240 mphFalcon / Speed
How many quarts of oil does a 4.0 Ford take?
Capacity: 5 quarts (with filter). When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.
What kind of oil does a 2004 Ford Falcon take?
Valvoline SynPower 5W-30 Engine Oil 6L.
How much oil does BF falcon take?
6.8 litres
For the Ford Falcon BA, BF, FG, and FGX models equipped with a 6-cylinder engine, the engine oil capacity is consistently 6.8 litres.
How much oil does a falcon take?
around 5.7 to 6.6 litres
A Ford Falcon usually requires around 5.7 to 6.6 litres of oil, but this depends on the make and model of your car. It deserves the right oil dose—not too much and not too little—and here at mycar we know just what your Ford Falcon needs.
How many quarts of oil does a 4.0 L take?
Oil Grade: API*
| Viscosity: | 10W-30 (Above -18°C) 5W-30 (Below 0°C) |
|---|---|
| Capacity: | 6 quarts (with filter). After refill check oil level. |
| Torque: | 25 ft/lbs (Oil Drain Plug) |
How much oil does a 2004 Ford hold?
Oil Grade: SEO15
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 21 ft/lbs (Oil Drain Plug) |
Does Ford require synthetic oil?
Ford strongly recommends using full-synthetic oil for your vehicle for optimal performance.
