How much oil does a 2014 Toyota Avalon 3.5 take?
The 2014 Avalon with the 3.5-liter V6 (2GR-FE) requires about 6.4 quarts (6.1 liters) of engine oil for a full change with a new filter. If you don’t replace the filter, plan on roughly 5.7 quarts (5.4 liters). Always verify the level with the dipstick after filling.
The following details the official capacity figures for this engine and when you might adjust the amount you pour in, depending on whether you replace the oil filter during the change. These figures reflect typical specifications for U.S.-market Avalons of that year and may vary slightly by region or filter type.
Oil capacity values
Before listing the exact figures, note that these numbers assume a complete oil change with the filter replaced. They help you plan the quantity needed when purchasing oil.
- 6.4 quarts (6.1 liters) with a new filter
- 5.7 quarts (5.4 liters) without replacing the filter
Concluding: For a standard oil change on the 2014 Avalon 3.5L, use about 6.4 quarts when installing a new filter; if you skip replacing the filter, the total needed drops to about 5.7 quarts. Always confirm the level with the dipstick after filling.
Maintenance tips
To ensure an accurate fill and proper engine lubrication, follow these steps: warm the engine, turn off and safely raise the vehicle, drain the old oil completely, replace the oil filter, pour in the recommended amount of oil, run the engine briefly, then recheck the level with the dipstick and add more if needed in small increments.
Summary
The 2014 Toyota Avalon 3.5L V6 typically holds 6.4 quarts of engine oil with a new filter during a standard oil change (6.1 liters). If the filter is not replaced, the capacity is about 5.7 quarts (5.4 liters). Always verify the precise level with the dipstick and follow the manufacturer’s recommended oil grade for your climate and region.
