How much oil does a 2016 Dodge 3.6 take?
For a 2016 Dodge with the 3.6L Pentastar V6, the engine oil capacity is about 6 quarts (5.7 liters) with a filter. If you are not replacing the filter, you’ll typically need around 5 quarts (4.7 liters).
The 3.6L Pentastar engine used across several 2016 Dodge models—including the Charger, Challenger, Durango, and Grand Caravan—generally follows this capacity. Always verify the exact amount for your specific vehicle in the owner's manual or on the under-hood oil-cap sticker, and use the dipstick to confirm the final level after a change.
Official oil capacity for 2016 Dodge 3.6L models
Below are the typical capacities for common 2016 Dodge models equipped with the 3.6L V6. The standard practice is 6 quarts with a filter; 5 quarts if the filter is not being replaced.
- Dodge Charger (2016) 3.6L V6: 6 quarts with filter
- Dodge Challenger (2016) 3.6L V6: 6 quarts with filter
- Dodge Durango (2016) 3.6L V6: 6 quarts with filter
- Dodge Grand Caravan (2016) 3.6L V6: 6 quarts with filter
Note: Some market-specific configurations or recent service bulletins could adjust this figure slightly. Always cross-check with your owner’s manual or the vehicle’s oil-cap label and verify the level with the dipstick after filling.
Recommended oil type and change interval
Most 3.6L Pentastar engines in 2016 Dodges call for 5W-20 oil, with 5W-30 as an alternative in hotter climates or for certain operating conditions. Follow the exact specification in your manual. Typical oil-change intervals range from about 5,000 to 7,500 miles depending on driving conditions and manufacturer guidance.
Summary
The 2016 Dodge 3.6L Pentastar V6 commonly requires about 6 quarts of engine oil with a filter, or around 5 quarts if the filter isn’t replaced. Always confirm the exact capacity for your vehicle and use the proper oil viscosity as specified by the manufacturer. After filling, recheck with the dipstick to ensure a correct level.
