How much oil does a 2016 Lexus 200t take?
The 2016 Lexus 200t uses a 2.0-liter turbo engine, and the typical oil capacity is about 5.3 quarts (roughly 5.0 liters) with a replaceable filter. Exact capacity can vary slightly by variant and market, so always verify with your owner's manual or service data for your specific VIN.
Variants covered
The 2016 model year used the 2.0L turbo engine (code 8AR-FTS) in several Lexus chassis, notably the IS 200t and NX 200t. While the engine family is the same, oil capacity can differ slightly due to oil pan design or filter size. The most reliable source for the precise capacity is the vehicle’s owner's manual or official service data tied to your VIN.
What you should know
Below is a concise snapshot of the commonly cited capacity for the 8AR-FTS engine in 2016 Lexus 200t variants. This figure represents a standard oil change with a new filter and a full pan fill. Always confirm with official documentation for your exact vehicle.
- Approximately 5.3 quarts (5.0 liters) of engine oil, including the filter.
Note: Some markets or service procedures may list slightly different values (within about ±0.2 quarts). Always verify with your manual.
How to refill and check oil
After changing the oil and filter, add oil gradually until the dipstick indicates the correct level with the engine at operating temperature and the vehicle on level ground. Recheck the level after the engine cools for a few minutes.
Additional considerations
Use the recommended viscosity for the 8AR-FTS engine. In many regions, 0W-20 synthetic is standard for this 2.0L turbo, but confirm the exact spec in your owner's manual or service data for your climate. Capacity variances among variants are typically small, but always rely on the official documentation for your VIN.
Summary
For the 2016 Lexus 200t with the 2.0L turbo engine (8AR-FTS), the typical oil capacity is about 5.3 quarts (5.0 liters) including the filter. Verify the precise figure for your specific vehicle using the owner's manual or Lexus service data, and use the recommended oil grade for your environment.
