How much oil does a 2017 Avalon take?
The 2017 Toyota Avalon with the 3.5-liter V6 engine (2GR-FE) uses about 6.4 quarts (6.0 liters) of engine oil when you replace the filter, with Toyota recommending 0W-20 synthetic for this engine.
Beyond the headline figure, it’s important to understand that the capacity refers to the total amount needed to fill the engine for a standard oil change, including a new filter. Actual amounts can vary slightly if you’re topping up rather than doing a full change, or if your maintenance procedures differ by region.
Capacity specifics
To orient readers: the engine oil capacity is specified as the total amount required to fill the engine from empty, including the filter. Here is the official figure for the 2017 Avalon’s 3.5L V6.
- Engine oil capacity (with filter): 6.4 quarts (6.0 liters).
When performing an oil change, pour in the full capacity in stages and recheck with the dipstick to avoid overfilling. After starting the engine and letting it run briefly, recheck the level again to ensure it sits within the correct range.
Oil type and maintenance tips
The 2017 Avalon’s 3.5-liter V6 typically calls for 0W-20 synthetic engine oil to ensure proper lubrication and fuel efficiency. Use a high-quality oil filter and follow the vehicle’s maintenance minder for service intervals. If you are in a region with different climate or driving patterns, consult the owner's manual for recommended alternatives or extended-change intervals.
Practical tips to manage oil volume and upkeep:
- Always confirm the exact capacity for your specific VIN in the owner’s manual or a Toyota dealership, as production changes can occur by region.
- Dispose of used oil properly at an authorized facility.
- Keep a spare quart for emergencies, but avoid topping up with oil that is older or contaminated.
In practical terms, ensuring you have the right amount of oil and using the recommended grade will help protect the V6’s lubrication and longevity.
Summary
For a 2017 Avalon with the 3.5L V6, plan for about 6.4 quarts of engine oil (6.0 liters) when performing a standard oil change with a new filter, using 0W-20 synthetic as recommended. Always verify the exact amount by checking the dipstick after filling, and follow the owner’s manual for maintenance intervals.
How many quarts of oil does a 1.8 L engine take?
A 1.8-liter engine typically takes between 3.5 and 4.5 quarts (about 3.3 to 4.3 liters) of oil, but this can vary significantly by make and model. The exact amount depends on the specific vehicle, and you should always check the owner's manual for the precise capacity, including whether a filter change requires a different amount.
- Check your owner's manual: This is the most reliable source for the exact amount of oil needed for your specific car.
- Consult online resources: Use your car's year, make, and model to search for specific oil capacities on automotive websites or forums.
- Add and check: It's best to start by adding about 4 quarts (or 3.5 liters) and then check the dipstick to ensure it's at the correct level. You can add more oil gradually until the dipstick indicates it's full, but do not overfill.
- Factor in the filter: If you are changing the oil filter at the same time, you will likely need the higher end of the capacity range.
- Safety note: Always wait a few minutes after running the engine for the oil to settle before checking the dipstick, and never overfill the engine with oil.
How many quarts of oil does a 2017 Avalon take?
The 2017 Toyota Avalon's oil capacity is 6.4 quarts for the standard V6 gas engine and 4.6 quarts for the hybrid model. Both versions require a 0W-20 viscosity oil.
- V6 Gas Engine: 6.4 quarts (with filter)
- Hybrid Engine: 4.6 quarts
- Recommended Oil: 0W-20
How much oil does a 3.5 L V6 Toyota engine take?
6.1 quarts
3.5L V6 Engine: 6.1 quarts with filter. 2.5L Hybrid Engine: 4.5 quarts with filter.
How much oil does a V6 avalon take?
2021 Toyota Avalon oil changes typically cost around $57 to $74 for 6.4 quarts of oil.
