How much oil does a 3.5 l Acura MDX take?
The 3.5L Acura MDX requires 4.5 quarts (4.3 liters) of oil for a standard oil change. This includes the oil filter, which holds an additional 0.5 quarts (0.47 liters) of oil.
Detailed Answer
The Acura MDX is a popular mid-size luxury SUV that comes equipped with a 3.5-liter V6 engine. When it comes to oil changes, the recommended oil capacity for this engine is 4.5 quarts (4.3 liters). This includes the oil filter, which holds an additional 0.5 quarts (0.47 liters) of oil.
It's important to use the correct oil type and quantity specified by the manufacturer to ensure the engine runs smoothly and efficiently. Acura recommends using 0W-20 synthetic oil for the 3.5L V6 engine in the MDX. This oil grade provides optimal lubrication and protection for the engine, especially in colder climates.
Oil Change Procedure
To change the oil in a 3.5L Acura MDX, you'll need the following:
- 4.5 quarts (4.3 liters) of 0W-20 synthetic oil
- 1 oil filter
- Oil drain pan
- Wrench to remove the oil filter
The basic steps for an oil change are:
- Park the MDX on a level surface and apply the parking brake.
- Locate the oil drain plug, usually on the bottom of the oil pan, and place the drain pan underneath.
- Using a wrench, loosen and remove the drain plug to allow the old oil to drain out.
- Once the oil has fully drained, replace the drain plug and tighten it securely.
- Locate the oil filter, typically accessible from the top of the engine, and use a filter wrench to remove it.
- Apply a thin coat of new oil to the gasket of the new filter, then screw it on by hand until secure.
- Unscrew the oil fill cap and pour in the 4.5 quarts (4.3 liters) of new 0W-20 synthetic oil.
- Replace the oil fill cap and start the engine to circulate the new oil.
- Check the oil level using the dipstick and add more oil if necessary to reach the full mark.
Following the manufacturer's recommended oil change interval and using the correct oil type and quantity is essential for maintaining the Acura MDX's engine health and performance.
How much oil does a 3.5 L V6 take?
6 quarts
Capacity: 6 quarts (with filter). After refill check oil level.
How much oil does a 3.5 L v6 Acura take?
4.5 quarts
4.5 quarts (with filter).
How much oil does a 20 Acura MDX 3.5 take?
5.7 quarts
Capacity: 5.7 quarts (with filter). After refill check oil level.
What kind of oil does a 2024 Acura MDX take?
The type of oil recommended for the Acura MDX is 0W-20 or 5W-20 in the Pooler region. 0W-20 is a full synthetic oil and 5W-20 is available as a blend.
How much oil do you put in a 3.6 L V6?
5.9 quarts (with filter).
How many quarts of oil does a 3.5 take?
Capacity: 6 quarts (with filter). After refill check oil level.
How much oil does a 2024 Acura MDX 3.5 L v6 take?
It takes around five quarts of oil for a full Acura MDX oil change, and your SUV will be cruising through Turlock and Stockton like a dream! Find out more about the Acura MDX oil types, and be sure to check out more service tips at Acura of Modesto.
How many quarts of oil does a 3.5 L V6 take?
6 quarts
Capacity: 6 quarts (with filter). After refill check oil level.
What kind of oil does a Acura MDX 3.5 take?
The type of oil recommended for the Acura MDX is 0W-20 or 5W-20 around Tustin. The first–0W-20–is a full synthetic oil and the second–5W-20–comes as a blend, which is a lower-priced option.
Can I use 5W30 instead of 5w20 in my Acura MDX?
When sticking with manufacturer recommendation of very low viscosity grade of oils like this, ensure you stick with VERY TOP QUALITY FULL SYNTHETIC oils. Else, use 5W30 Synthetic especially if you drive under high speed and load. Nothing is wrong.
