How much oil does a 3.5 L Acura take?
A typical 3.5-liter Acura V6 engine requires about five quarts (roughly 4.7 liters) of engine oil when performing a full oil change with a new filter. This is the baseline you’ll commonly encounter across multiple Acura models that use the 3.5 L V6, though exact figures can vary by year and model.
The exact oil capacity for a given Acura 3.5 L can differ depending on the specific model, year, and whether the oil filter is being replaced during the change. Always confirm with the owner's manual or the dealer service guide for your car.
Typical capacity for the 3.5 L V6 family
Before listing the common figure, note that the 3.5 L V6 family (used in several Acura models over the years) generally aligns around a five-quart change when including a new filter.
- About 5 quarts (4.7 liters) of engine oil with a new filter for most 3.5 L Acura models.
In practice, most owners in routine maintenance will add roughly five quarts during a standard oil change. Always verify with your manual and check the dipstick to reach the proper full level.
What can affect the amount you need to pour?
Before the next list, consider that several factors can influence the exact amount you pour during an oil change.
- Model-year and engine variant within the 3.5 L V6 family—some slight differences may exist in official capacity figures.
- Whether you replace the oil filter (standard practice during a full change) adds the volume of the new filter to the total.
- Oil type (synthetic vs conventional) does not change the capacity, but it can affect viscosity and the point at which you reach the “full” mark on the dipstick.
- Vehicle condition or previous oil changes (e.g., drain completeness) can affect how much you need to reach the full line.
For the most precise result, use the official specification for your exact car and confirm with the dipstick during the job.
How to verify the exact capacity for your car
To confirm the exact oil capacity for your specific Acura 3.5 L model and year, follow these steps:
- Consult the owner’s manual or a certified service guide for your exact model/year to find the stated oil capacity with filter.
- Check the under-hood information label or service data for your vehicle if available; some cars list capacity there.
- When in doubt, ask an Acura dealer or a qualified mechanic and provide your VIN for precise data.
- During an oil change, begin with about 4.5–5.0 quarts (4.3–4.7 L) and use the dipstick to reach the correct full mark after the engine runs and settles.
Following these steps will help ensure you put in the correct amount for your specific car and avoid overfilling or underfilling.
Summary
For most Acura models powered by the 3.5 L V6, the standard oil-change quantity is around five quarts (about 4.7 liters) with a new filter. Always verify the precise capacity for your exact year and model in the owner's manual or with a dealer, and use the dipstick to dial in the correct full level after the engine runs briefly. When in doubt, consult a professional to ensure proper oil capacity and engine protection.
How much oil does a 3.5 L V6 need?
Engine Oil
Capacity: 6 quarts (with filter). After refill check oil level.
What kind of oil does a 2019 Acura TLX 3.5 take?
fully synthetic motor oil
So, what is the recommended oil for the Acura TLX? The automaker advises using fully synthetic motor oil with a grade of 0W-20, which provides these benefits for every drive in Cedar Rapids or wherever the road takes you: Enhanced lubrication to minimize heat, friction, and wear and tear.
How much oil does a 3.5 l Acura MDX take?
The oil capacity for an Acura MDX with a 3.5L V6 engine is 5.7 quarts when changing the oil filter. It's crucial to always check the dipstick after refilling and consult your owner's manual for the most accurate information for your specific model year.
- For most 3.5L V6 engines: The capacity is 5.7 quarts when you change the oil filter.
- For newer models: Some sources indicate a capacity of around 5.5 quarts.
- Always verify: After adding the oil, always check the dipstick to ensure the level is correct.
- Consult your owner's manual: This is the most definitive source of information for your specific vehicle.
How much oil does a Acura TLX 3.5 take?
However, in general, the Acura TLX oil capacity for most models is about 5.5 to 5.7 quarts, which includes the oil filter.
