How much oil does a 4.5 V8 Land Cruiser take?
The commonly used 4.5-liter V8 diesel in modern Toyota Land Cruisers requires about 9.5 liters of engine oil when performing a full change with a new filter. Exact capacity can vary by engine variant and model year, so always verify with your manual or a dealership guide.
Engine variants and official capacity
The 4.5 V8 designation on current Land Cruisers typically refers to the 4.5-liter twin-turbo diesel (engine code 1VD-FTV) found in LC200/200 Series models in many markets. Some markets or older generations used different 4.5-liter V8 configurations, and those may have different oil capacities. The numbers below reflect the common 1VD-FTV diesel configuration used in many LC200 examples.
Typical oil capacities (with and without filter) for this engine are:
- With oil filter: about 9.5 liters (approximately 10.0 quarts)
- Without oil filter: about 8.5–9.0 liters (approximately 9.0–9.5 quarts)
Note: Some service manuals specify 9.5 L as the total capacity including the filter. Always verify using the dipstick and the vehicle’s official documentation for your exact year and VIN.
How to perform an oil change and verify capacity
When changing oil on a 4.5 V8 Land Cruiser, follow standard diesel-change procedures and use the recommended oil grade as specified by Toyota for your climate and year (commonly 5W-30 to 5W-40 in many regions). After filling, run the engine, let it settle, re-check the dipstick, and top up to the full mark. Avoid overfilling, as diesel engines can be sensitive to too much oil.
Tips for accuracy
Always consult the official maintenance schedule and the owner’s manual for your exact model year and market, since capacity can vary slightly between iterations due to oil filter size, oil cooler configurations, or other equipment changes.
Summary
In practical terms, plan on about 9.5 liters of engine oil with a new filter for the 4.5 L V8 diesel commonly found in LC200-series Land Cruisers, with a typical range of 8.5–9.0 liters if the filter is not replaced. For precise figures, reference your vehicle’s specific manual or contact a Toyota service center, and always confirm by checking the dipstick after refilling.
