How much oil does a 4.7 Toyota V8 take?
The 4.7-liter Toyota V8, known in engine circles as the 2UZ‑FE, typically requires about 6.6 quarts (6.3 liters) of engine oil for a full change with a new filter. Exact capacity can vary slightly by model year and configuration, so it’s best to double-check the owner’s manual and confirm with the dipstick after filling.
Official oil capacity for the 2UZ‑FE 4.7L V8
The figures below reflect common service specifications used for a complete drain and refill, including replacing the oil filter. These numbers help motorists plan purchases and the initial fill at the shop or at home.
- With the oil filter installed: about 6.6 quarts (approximately 6.3 liters).
- Without replacing the filter: roughly 6.0–6.3 quarts (about 5.7–6.0 liters).
Practically, you should have a little extra oil on hand and verify the level with the dipstick after starting the engine and letting it run to operating temperature. While these figures are typical for the 2UZ‑FE used in many Toyota and Lexus SUVs and trucks from the late 1990s through the 2010s, there can be small variations by year and market.
Practical tips for ensuring the correct fill
Always use the correct viscosity recommended for your climate and model year, and consider using a compatible filter when performing the change. After adding oil, run the engine, recheck the level, and top off as needed to reach the full mark on the dipstick.
Summary
For the Toyota 4.7L V8 (2UZ‑FE), plan on about 6.6 quarts (6.3 liters) of oil when doing a full change with a new filter. If you don’t replace the filter, the total can be slightly less, around 6.0–6.3 quarts. Always verify with the owner’s manual and the dipstick to account for year-to-year variations.
