How much oil does a 6.7 powerstroke take for oil change?
The quick answer: about 13 quarts (roughly 12.3 liters) of engine oil with a new filter is typically required for a full oil-and-filter change on most Ford F-Series 6.7L Power Stroke diesels.
The 6.7 Power Stroke is the large V8 diesel used in Ford F-250 and F-350 Super Duty pickups since 2011. Oil capacity can vary by model year and whether the filter is being replaced. Always confirm the exact capacity for your specific vehicle year and configuration in the owner’s manual or Ford service data, and fill to the proper dipstick level.
Oil capacity basics
Below are the common capacity figures reported for typical 6.7L Power Stroke service. These values assume a standard oil-and-filter change and engine that has been drained fully. If you are not replacing the filter, capacity will be slightly less because some oil remains in the filter and routing.
- With oil filter replaced: about 13 quarts (approximately 12.3 liters).
- Without replacing the filter: roughly 11–12 quarts (about 10.5–11.4 liters).
Note: Actual capacity can vary by year, emission configuration, and whether the engine has any additional external oil reservoirs or coolers. Always refer to the owner's manual or Ford service data for your exact configuration.
Why the numbers can vary
Engine design updates, changes in oil filtration systems, and regional service bulletins can adjust the reported capacity by a quart or so. The most reliable guide is the factory specification for your vehicle's year and build. Always top off gradually and recheck the dipstick to reach the correct level.
Oil type and service tips
For a 6.7L Power Stroke, use high-quality diesel engine oil that meets Ford's specification for CK-4 or CJ-4 (depending on year). Typical grade is 5W-40 synthetic diesel oil. Use a new oil filter during the change, and reset oil change indicators if equipped. Consider an oil change interval per the owner's manual, which is typically every 7,500–10,000 miles under normal conditions, or sooner under heavy use or towing.
Summary
Most Ford 6.7L Power Stroke engines require about 13 quarts of oil with a new filter for a full oil-and-filter change, with some minor year-to-year variation. Always verify the exact capacity for your vehicle and fill to the proper dipstick level using the recommended diesel oil grade. Plan to buy a little extra oil to account for spillage and top-offs, and ensure you replace the oil filter with every change.
How much oil does a 2015 Ford f350 6.7 take?
The engine oil capacity for a 2015 F-350 with the 6.7L engine is 13 quarts (12.3 liters) when changing the filter. Some sources specify 13.1 quarts, so it is best to start with 13 quarts and check the dipstick before adding more to reach the full level.
- Capacity: 13 quarts (12.3 liters) with a filter change.
- Oil type: Use an oil that meets Ford's specifications, such as SAE 0W-40 full synthetic or 5W-40 for severe operations or when using biodiesel blends.
- After filling: Always check the oil level with the dipstick and add more as needed to reach the correct level.
How many quarts of oil does a 6.7 powerstroke take?
The amount of oil a 6.7 Powerstroke takes depends on the model year: 2011–2022 models typically require 13 quarts, while 2023 and newer models require 15 quarts (with filter). For F-650 or F-750 models, the capacity is 15 quarts for 2015–2022 and 17 quarts for 2023 and later.
| Model Year | Capacity (with filter) |
|---|---|
| 2011–2022 (F-250 to F-600) | 13 quarts |
| 2015–2022 (F-650 and F-750) | 15 quarts |
| 2023 and newer (F-250 to F-600) | 15 quarts |
| 2023 and newer (F-650 and F-750) | 17 quarts |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_j9Ilac-WAc_Di-gPz6q44Ac_216';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
What oil should I use in my 6.7 powerstroke?
For a 6.7 Powerstroke, use 10W-30 for normal duty and 5W-40 or 15W-40 for severe duty, towing, or when using biodiesel blends. The oil must meet the Ford spec WSS‑M2C171‑F1. For colder climates, 5W-40 is a good all-season option, while 10W-30 is acceptable for less demanding, year-round use in warmer climates.
Oil recommendations by service type
- Normal duty: Use 10W-30 that meets the Ford specification WSS‑M2C171‑F1.
- Severe duty: Use 5W-40 (full synthetic is often recommended) or 15W-40.
- Severe duty includes frequent towing, heavy loads, extended idling, stop-and-go traffic, and extensive use of biodiesel blends.
- 5W-40: Colder climates: is recommended for its better cold-start performance.
Important considerations
- Check the owner's manual: Always consult your owner's manual for the most accurate recommendation for your specific model year, as requirements can vary slightly.
- Check the oil cap: The oil fill cap will state the recommended oil types for your truck.
- Use the correct specification: Ensure the oil meets the Ford specification WSS‑M2C171‑F1 to ensure proper protection and prevent damage.
- Change intervals: Many owners recommend changing the oil every 4,000-5,000 miles due to fuel dilution, especially if you drive under severe conditions, according to Reddit users.
What kind of oil does a 2019 f250 6.7 take?
For a 2019 Ford F-250 with a 6.7L engine, the recommended oil is SAE 10W-30 meeting specification WSS-M2C171-F1 for normal duty. For severe service (such as towing, heavy loads, or using biodiesel blends), use SAE 5W-40 or 15W-40. In extreme cold, 0W-40 can be used.
Standard and severe duty
- Standard: Use SAE 10W-30 meeting Ford specification WSS-M2C171-F1.
- Severe duty: For towing, heavy use, or biodiesel blends, use SAE 5W-40 or 15W-40.
- Extreme cold: Use 0W-40 in temperatures below -22∘Fnegative 22 raised to the composed with power cap F−22∘𝐹 (-30∘Cnegative 30 raised to the composed with power cap C−30∘𝐶).
Other considerations
- Engine oil capacity: The 6.7L engine holds 13 quarts with the filter.
- Oil specification: Always ensure the oil meets the Ford specification WSS-M2C171-F1 or the appropriate CK-4 rating for diesel engines.
- Full synthetic: Using a 5W-40 full synthetic oil is recommended for its better performance in both cold and hot weather compared to standard 10W-30.
