How much oil does a Lexus ls460 take?
The Lexus LS460’s 4.6-liter V8 typically requires about 6.0 quarts (roughly 5.7 liters) of engine oil for a standard change with a new filter. Plan to have around 6.5 quarts on hand to top up after draining and replacing the filter, and always verify the exact amount in your owner’s manual.
Understanding the oil capacity for the LS460
Oil capacity is defined by the engine sump plus the oil filter. The LS460 uses a 4.6-liter V8, and while the official specification sits near six quarts with a filter, the precise amount can vary slightly by model year and service procedure. A full drain and new filter typically necessitate a little extra to reach the proper dipstick reading.
Notes on practice and maintenance
When performing an oil change, use the viscosity recommended by Lexus for your climate and vehicle year, commonly 5W-30. In extreme temperatures, the manual may suggest an alternative within the approved range. After filling, always recheck with the dipstick to ensure the oil level sits within the recommended marks.
Bottom line
For most LS460 owners, budgeting around 6 quarts of oil with a filter is appropriate, with a small buffer (about a half-quart) to accommodate topping off after the fill. Exact figures can vary slightly, so consult the owner’s manual or a Lexus service bulletin for your specific year and VIN.
Summary
In short, the LS460 generally takes about 6.0 quarts of engine oil with a filter, with approximately 6.5 quarts needed to reach full after a complete change. Always confirm the exact capacity and recommended oil grade in your vehicle’s manual and follow proper servicing procedures.
