Loading

How much oil does a lx470 take?

The LX470’s 4.7-liter V8 generally requires about 6.9 quarts (6.5 liters) of engine oil when performing a standard oil change with the filter replaced; if the filter is not replaced, it’s typically around 6.0 quarts (5.7 liters).


The LX470, built from 1998 to 2007, uses the 4.7L V8 engine (2UZ-FE). Oil capacity can vary slightly by model year and whether the oil filter is changed. For exact specifications, consult the owner’s manual or a factory service bulletin for your specific year and engine code.


Oil capacity overview


The capacity figures below assume a standard oil change with the filter replaced. Variations can occur based on engine revisions, the oil pan, and whether you drain and refill without replacing the filter.


Capacity figures



  • With a new oil filter (typical oil change): 6.9 quarts (6.5 liters)

  • Without replacing the oil filter: about 6.0 quarts (5.7 liters)


These figures are approximate guidelines. Always verify on the dipstick after refilling and adjust to match your vehicle’s manual specifications.


Oil type and maintenance tips


For most climates, Toyota/Lexus generally recommends 5W-30 engine oil. In very hot climates, 10W-30 can be acceptable, but always confirm with the manual. Use a quality oil filter and replace the drain plug gasket as needed to prevent leaks.


Practical steps for an LX470 oil change


If you’re performing an oil change, follow these typical steps to ensure a proper fill.



  1. Park on a level surface and let the engine cool slightly; engage the parking brake.

  2. Raise the vehicle safely and support it with jack stands if needed.

  3. Drain the old oil from the drain plug and remove the old oil filter.

  4. Install a new oil filter and replace the drain plug gasket if necessary.

  5. Fill with the recommended oil quantity (roughly 6.9 quarts with filter for a standard change).

  6. Start the engine, check for leaks, and recheck the oil level with the dipstick; top up if needed.


Dispose of used oil and filters according to local regulations. If you’re unsure about the exact figure for your LX470 year, consult the service manual or a qualified mechanic.


Summary


For the LX470 (2UZ-FE 4.7L), aim for about 6.9 quarts (6.5 liters) of engine oil when changing the filter, or about 6.0 quarts (5.7 liters) if not replacing the filter. Use 5W-30 oil in most climates, and verify the exact capacity against your year’s manual. Always check the dipstick after refilling to ensure the level is correct.

How much oil does a 2007 LX470 take?


Capacity: 7.2 quarts (with filter). After refill check oil level.



What oil does LX470 take?


Mobil 1 – Advanced 5W-30 Full Synthetic Motor Oil, Extends Engine Life, 1 Quart (Part No. 24812)



How many quarts of oil does a 3.0 V6 Toyota take?


5 quarts
Pour 5 quarts of 10W-30 automobile oil into the engine. Use one hand to stabilize the funnel to help prevent spills.



How much oil does a Lexus LX 470 take?


The oil capacity for a Lexus LX470 is 7.2 quarts (6.8 liters) when including the oil filter change. It's a good practice to have a little extra oil on hand and to always check the dipstick after refilling to ensure the correct level. 

  • Capacity: 7.2 quarts (6.8 liters) 
  • When to check: After refilling the engine, run it for a short time, then check the dipstick to confirm the oil is at the correct level. 
  • Recommendation: Have a little extra oil on hand to be safe. 


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.