How much oil does a Toyota Land Cruiser take?
The exact oil capacity depends on the engine and generation of your Land Cruiser. In general, most Land Cruisers require about 6 to 9 quarts of engine oil for a full change, with gasoline engines typically around 6.5–7 quarts and some diesel or larger V8 configurations closer to 8–9 quarts. Always verify the precise figure for your specific model in the owner's manual or by checking the engine code.
This article breaks down typical capacities for common Land Cruiser engines, explains how to determine the exact amount for your vehicle, and offers practical tips for performing an oil change correctly.
Engine options and typical capacities
Below are typical capacities for commonly used Land Cruiser engines. These figures are estimates and can vary by year, trim, and added equipment. Always confirm with your manual or dealer literature if you’re unsure.
Gasoline engines
- 4.0 L V6 (1GR-FE) — approximately 6.9 quarts (6.5 L) of engine oil with filter.
- 5.7 L V8 (3UR-FE) — approximately 7 quarts (6.6 L) of engine oil with filter.
Note: Variations between model years and regional specifications can shift these values by a small margin. Always rely on the official spec for your exact vehicle.
Diesel engines
- 4.5 L V8 diesel (1VD-FTV) — approximately 9 quarts (8.5 L) of engine oil with filter.
Diesel capacities tend to be higher due to different oiling requirements and engine design. If your Land Cruiser uses a diesel option, verify the exact figure in the service or owner documentation for your specific year and market.
How to determine the exact capacity for your vehicle
- Identify your engine code and model year. Oil capacity can change across generations and markets.
- Check the owner’s manual or Toyota’s official service specifications for your exact engine and year.
- If the manual isn’t available, consult a Toyota dealer or trusted repair database with your VIN and engine code.
- When performing a change, use the dipstick to confirm the correct fill level after warm-up and a brief rest; add oil in small increments to reach the proper level.
Accurate confirmation is important because the presence of an oil cooler, aftermarket filters, or different drain plugs can slightly alter the total capacity. Always verify with an authoritative source for your specific vehicle.
Practical tips for oil changes
Following best practices helps ensure you replace the oil correctly and avoid overfilling or underfilling your engine.
- Use the recommended viscosity and grade: Toyota typically specifies a viscosity based on climate and engine, such as 5W-30 or 0W-20 for many engines; check your manual for the exact grade.
- Use the correct oil filter: A new oil filter should be installed with every change; a quality filter helps maintain oil pressure and filtration.
- Don’t overfill: Adding too much oil can cause foaming and pressure issues. Add gradually and recheck with the dipstick after a brief idle/rest period.
- Warm engine, then drain: A warm engine drains more oil, giving a more accurate measurement of capacity and leaving less residue in the engine.
- Recycle and dispose properly: Dispose of used oil and filters according to local regulations; many service centers offer recycling.
By following these guidelines and confirming the exact capacity for your specific Land Cruiser, you can complete a safe and effective oil change.
Summary
Oil capacity for a Toyota Land Cruiser depends on the engine and generation. Typical ranges are about 6.5–7 quarts for common gasoline engines and up to around 8–9 quarts for certain diesel configurations. Always verify the precise figure in your owner's manual or via the engine code and model year, and follow proper oil change practices to ensure optimal engine health.
How much oil does a 2019 Toyota Land Cruiser take?
7.9 quarts
A 2019 Toyota Land Cruiser takes 7.9 quarts of oil.
How many quarts of oil does a 3.6 L V6 take?
A 3.6L V6 engine typically takes between 5 and 6 quarts of oil, but the exact amount varies by vehicle model, so you must check your owner's manual or the oil fill cap for the precise capacity. For example, some models like a 2013 Jeep JK require 6 quarts, while newer models like a 2020 Jeep Wrangler or 2018+ Jeep Wrangler JL may only take 5 quarts.
Here are some general guidelines:
- Check your owner's manual: This is the most reliable source for your specific vehicle.
- Look at the oil fill cap: It may have the required viscosity and capacity printed on it.
- Consider the model year: Newer vehicles, especially certain Jeep models, have different oil capacities than older ones.
- Change the oil filter: Always include an oil filter change, as this is part of the full oil capacity.
- After refilling, check the level: After you've filled the engine with oil, use the dipstick to check the oil level and add more if needed to reach the "full" line.
How many quarts of oil does a 1.8 L engine take?
A 1.8-liter engine typically takes between 3.5 and 4.5 quarts (about 3.3 to 4.3 liters) of oil, but this can vary significantly by make and model. The exact amount depends on the specific vehicle, and you should always check the owner's manual for the precise capacity, including whether a filter change requires a different amount.
- Check your owner's manual: This is the most reliable source for the exact amount of oil needed for your specific car.
- Consult online resources: Use your car's year, make, and model to search for specific oil capacities on automotive websites or forums.
- Add and check: It's best to start by adding about 4 quarts (or 3.5 liters) and then check the dipstick to ensure it's at the correct level. You can add more oil gradually until the dipstick indicates it's full, but do not overfill.
- Factor in the filter: If you are changing the oil filter at the same time, you will likely need the higher end of the capacity range.
- Safety note: Always wait a few minutes after running the engine for the oil to settle before checking the dipstick, and never overfill the engine with oil.
How many quarts of oil does a Toyota Land Cruiser take?
Don't let anyone crank your Land Cruiser while it is oilless. That will ruin your engine make sure you take precautions.
