How much oil does an Acura CL take?
The typical oil capacity for an Acura CL ranges from about 4.5 to 5 quarts (roughly 4.3 to 4.7 liters) depending on the engine variant and whether you replace the oil filter.
Across its production years, the Acura CL offered several engines—from four-cylinders to V6s—so the exact amount can vary by year and trim. Always confirm the specification for your specific year and engine in the owner's manual or a factory service bulletin.
Engine options and oil capacity
The following capacities reflect common configurations in the CL lineup. Before performing an oil change, verify the exact figure for your vehicle's VIN in the manual or with a dealer.
- 4-cylinder engines (roughly 4.5 quarts / 4.3 liters with filter)
- 3.0-liter V6 engines (roughly 5.0 quarts / 4.7 liters with filter)
- 3.2-liter V6 engines (roughly 5.0 quarts / 4.7 liters with filter)
Bottom line: use these numbers as a baseline, but always check your specific model year and engine to confirm the exact capacity.
Oil grade and maintenance tips
Choosing the right oil and ensuring the correct fill level matters for engine longevity. The CL's oil type and capacity are best aligned with the manual for your year and engine variant.
- Use the grade recommended in your owner’s manual (often 5W-30 for older CL models; some markets may specify 5W-20).
- Replace the oil filter with a genuine or high-quality equivalent during every oil change.
- When refilling, add roughly the listed capacity, then recheck with the dipstick. Do not overfill.
After completing an oil change, run the engine briefly, then shut it off and let it settle. Recheck the dipstick once the oil has cooled to ensure the level is within the proper range.
Summary
The Acura CL’s oil capacity varies by engine: about 4.5 quarts for 4-cylinder models and about 5 quarts for V6 variants. Always confirm the exact figure for your year and engine, and follow the recommended oil grade and change interval to keep the engine performing well.
How much oil does a 2003 Acura CL take?
4.6 quarts
Oil Grade: API*
| Viscosity: | 5W-20, 0W-20 (All TEMPS) - Acura Engine Oil Application Guide (Rev. 12/1/11) indicates that 0W-20 is acceptable to use in this application. |
|---|---|
| Capacity: | 4.2 quarts. w/of. After refill check oil level. |
| Capacity: | 4.6 quarts (with filter). After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
What kind of oil does a 2001 Acura CL take?
Mobil 1 ESP Full Synthetic Engine Oil 5W-30 5 Quart.
How many quarts of oil does a 3.7 L V6 take?
A 3.7L V6 engine typically requires 6 quarts of oil, including the oil filter. However, the exact amount can vary slightly depending on the vehicle, so it is always best to check your owner's manual for the most accurate information for your specific make and model.
- Capacity: Most 3.7L V6 engines, such as those found in many Ford and Jeep models, require about 6 quarts of oil when replacing the filter.
- Verification: After refilling, always check the dipstick to ensure the oil level is correct. Do not overfill.
- Owner's Manual: To confirm the exact oil capacity and the correct oil viscosity for your specific vehicle, consult your owner's manual.
How much oil does a 1999 Acura CL 2.3 take?
Capacity: 4.5 quarts (with filter).
