How much oil does my Ford Kuga take?
Oil capacity for a Ford Kuga depends on the engine and model year. In general, petrol engines use about 4.5–5.0 liters (including a new filter), while diesel engines require roughly 5.5–6.0 liters (including the filter). Always verify the exact figure for your specific engine by checking the owner's manual or the engine code.
Understanding oil capacity across Kuga generations
The Ford Kuga has offered several engine options over its generations, so the precise oil capacity varies. The figures below are approximate ranges intended as a practical reference for common petrol and diesel engines found in Kugas across different years. For the exact number, refer to official Ford specifications for your vehicle’s year and engine code.
- Petrol engines (such as EcoBoost variants): roughly 4.5–5.0 liters when performing an oil change with a filter.
- Diesel engines (such as EcoBlue/Duratorq variants): roughly 5.5–6.0 liters when performing an oil change with a filter.
Note that exact capacity can vary due to factors like engine design changes, oil cooler presence, or additional components. Use the specification for your exact engine code to confirm the precise amount.
How to confirm the exact capacity for your vehicle
To ensure you add the correct amount of oil, identify the engine code and consult official documentation or a Ford dealer. The steps below help you verify the precise capacity for your particular car.
- Check the owner's manual or a Ford service data sheet for your model year and engine type.
- Find the engine code under the bonnet or on the vehicle information label to look up the exact spec.
- When adding oil, use the dipstick method: add in increments, recheck the level, and stop at the full mark when it matches the recommended capacity for your engine.
- If in doubt, contact a Ford dealer or a qualified mechanic with your VIN to confirm the exact capacity.
Accurate capacity ensures proper lubrication and helps protect the engine. Always use the grade and specification recommended for your engine.
Practical tips for oil changes
Plan ahead: have the correct oil type and quantity on hand, replace the oil filter with every change, and dispose of old oil properly. The Kuga’s oil capacity is a key part of routine maintenance that supports engine longevity and performance.
Summary
Oil capacity for the Ford Kuga varies by engine and year, with petrol engines typically needing about 4.5–5.0 liters and diesel engines about 5.5–6.0 liters (including the filter). For the exact figure, consult your owner's manual or Ford’s official specifications using your engine code or VIN. Following the correct capacity and using the recommended oil grade are essential for reliable operation and warranty compliance.
How much oil does a Ford Kuga need?
Oil capacity: You need 5.8 liters of engine oil to change the oil in FORD KUGA 2 (DM2) 2.0 TDCi Diesel 150. Please note! Warning! Please note!
What is the 1.5 L 3 cylinder engine Ford Kuga?
The entry-level engine in the Kuga line-up is a turbocharged 1.5-litre three-cylinder petrol unit. It develops 150hp and 240Nm of torque (pulling power), which Ford says is enough for a 0–60mph time of 9.5 seconds and a top speed of 121mph when paired with its standard six-speed manual gearbox.
How much oil does a 2019 Kuga 1.5 take?
The quantity needed to change the oil in your engine is 4,1 litres.
What kind of oil does a Ford Kuga 2.5 take?
Ford Kuga 2020-2024. Castrol Magnatec 0w20 6L 1x Z15F704 1x Z15F703. Oil filter 2207993.
