What oil goes in a Ford Galaxy diesel?
The Ford Galaxy diesel typically requires a fully synthetic 5W-30 engine oil that meets Ford’s current specification, commonly WSS-M2C934-B; older engines may require WSS-M2C913-C. Always check your owner’s manual or the under-hood label to confirm the exact specification for your model and region.
Oil specifications for Ford Galaxy diesel engines
Oil type and viscosity can vary by engine generation and market. Ford’s newer diesel engines in the Galaxy (EcoBlue) use a specific modern standard, while earlier Duratorq/TDCi engines used older specifications. Picking oil that matches the correct Ford spec is essential for performance and warranty.
These oil options cover the most common setups you’ll find in Ford Galaxy diesel models. The exact choice depends on your engine and region, so verify with the manual or dealer.
- WSS-M2C934-B: Ford specification for EcoBlue 2.0 diesel engines commonly found in newer Galaxy models. The oil should be fully synthetic and meet this standard.
- WSS-M2C913-C: Older Duratorq/TDCi engines used in earlier Galaxy models, typically requiring a 5W-30 fully synthetic grade that meets this older Ford specification.
In addition to the correct Ford spec, choose the right viscosity for your climate. 5W-30 is the default in many regions, but some engines may permit 5W-40 in hotter climates or under severe conditions, as long as the oil still meets the Ford specification.
Practical guidance: checking and maintenance
Always verify the exact specification and viscosity in your owner’s manual or on the service label under the hood. If you’re unsure, consult a Ford dealer or a qualified mechanic to avoid using the wrong oil and potentially affecting warranty or engine longevity.
- Use only a fully synthetic engine oil that meets the Ford specification noted for your vehicle (e.g., WSS-M2C934-B or WSS-M2C913-C).
- Choose the correct viscosity as recommended (commonly 5W-30, with 5W-40 acceptable in some regions if mandated by the spec).
- Check the oil level using the dipstick or electronic system and top up as needed with the same spec oil.
- Follow the service interval defined in your manual or on the in-vehicle maintenance system; change oil and filter accordingly.
Oil capacity varies by engine and filter size; expect roughly 5.5 to 6 liters for a full oil change, but consult the manual for your exact figure.
Summary
For a Ford Galaxy diesel, the safest rule is to use a fully synthetic 5W-30 oil that meets Ford’s current specification (generally WSS-M2C934-B for EcoBlue engines; WSS-M2C913-C for older Duratorq engines). Always verify the exact spec and viscosity in your owner’s manual or by asking a dealer, and adhere to the scheduled maintenance to protect the engine and warranty.
