How much refrigerant does a Ford F150 take?
The exact quantity depends on the model year and the refrigerant type used in the system. In general, Ford F-150s that run on R-134a require roughly 28–32 ounces (about 0.8–0.9 kilograms) of refrigerant for a full charge, while newer trucks using R-1234yf typically need about 22–26 ounces (about 0.6–0.74 kilograms). Always verify the precise figure on the vehicle’s service label or in the official Ford manual.
Refrigerant types and capacity
Two common refrigerants in F-150s
Ford phased the F-150 through a transition from R-134a to the more eco-friendly R-1234yf on later model years. Because the two refrigerants have different properties and required oil charges, the total system weight varies by year and engine designation.
To determine the exact capacity for a specific truck, follow these steps:
- Check the under-hood refrigerant service label for “Total Charge” and the refrigerant type. This label is usually on the A/C accumulator/receiver-drier or near the compressor lines.
- Consult the vehicle’s owner manual or the Ford service/repair manual (ETIS) for the exact charge by year, engine, and refrigerant type.
- If you don’t have the label or manual, contact a Ford dealer with your VIN to pull the precise spec.
- As a cross-check, a professional technician will typically weigh the refrigerant after evacuating the system to ensure the correct total density is met.
The following notes help ensure you understand where these figures come from and how to use them.
Notes on accuracy and safety
Capacities vary by optional equipment, condenser size, engine type, and whether the A/C system has additional lines or accessories. Always use the refrigerant type specified by Ford for your exact vehicle and charge by weight with a calibrated scale or gauge set. Do not estimate by “feel.”
If you’re unsure, a qualified automotive technician can confirm the right charge and perform the recharge while protecting the compressor and seals.
Safe recharge practices and common mistakes
Before recharging, ensure the system is evacuated of old refrigerant and moisture, locate leaks, and charge slowly while monitoring pressures to avoid overcharging, which can damage seals and reduce cooling performance.
- Evacuate the system completely using a vacuum pump to remove air, moisture, and old refrigerant.
- Inspect for leaks; repair any found before charging.
- Connect the refrigerant canister or manifold gauge set using the correct hose adapters for R-134a or R-1234yf as specified by Ford for your model year.
- Charge by weight to the exact specification written on the service label or manual, not by guesswork or sight alone.
- After charging, run the AC with a full fan blast and observe the system pressures and vent temperatures to confirm proper cooling.
With the correct refrigerant type and charge, the F-150’s air conditioning should perform as designed across seasons.
Summary
In short, the Ford F-150’s refrigerant capacity is not identical across all years. The best practice is to verify the exact total charge on the under-hood label or in Ford’s official repair documentation for your year and engine. For older models using R-134a, expect roughly 28–32 oz (0.8–0.9 kg); for newer models with R-1234yf, target about 22–26 oz (0.6–0.74 kg). Always charge by weight and have any leak issues addressed by a professional.
How much freon does a 2016 Ford F150 3.5 take?
2016 Ford F150 EcoBoost AC Recharge Capacity Guide
The 2016 Ford F150 EcoBoost 3.5L typically requires about 2.0 to 2.5 pounds of R-134a refrigerant for a full AC recharge. Before adding refrigerant, check for leaks using a UV dye or electronic leak detector.
How much to recharge AC in Ford F150?
between $300 and $380
The average cost for a Ford F-150 AC Recharge is between $300 and $380.
How much freon does a 2007 Ford F150 5.4 L take?
Capacities and Specifications - 5.4L V8
| Item | Capacity |
|---|---|
| Fuel tank (Optional or E-Super Duty) | 55 gal (208 L) |
| A/C refrigerant | 1.9 lb (0.85 kg) |
| A/C refrigerant compressor oil | 8.0 fl oz (237 ml) |
| A/C refrigerant compressor oil (Prep package) | 16.0 fl oz (473 ml) |
How much freon does a Ford F150 hold?
Ford F-150
Its refrigerant capacity varies depending on the year and AC system specifics. Model Years: 2015-2023 Refrigerant Type: R-134a Capacity: Approximately 1.5 to 2.0 lbs (24 to 32 oz) Notes: Always verify with the specific service manual for your truck's engine and AC system.
