What oil does 2016 Acura TL take?
The 2016 Acura TL takes synthetic 0W-20 motor oil that meets ILSAC GF-5 and API SN specifications. The engine capacity is about 4.5 quarts with a filter, and you should verify the level with the dipstick after an oil change.
This article explains the exact oil grade and specifications, the approximate capacity, and practical maintenance tips to keep the TL’s V6 running smoothly.
Recommended oil specifications
Here is a concise reference for the oil grade, specification, and capacity you should use for the 2016 TL.
- 0W-20 synthetic motor oil
- Meets ILSAC GF-5 and API SN (or newer) specifications
- Oil capacity: approximately 4.5 quarts (4.3 liters) with filter
Using the correct oil grade and capacity helps maintain engine protection and fuel efficiency, and using a non-specified oil can affect performance or warranty.
Oil brand and quality tips
When selecting oil, look for a reputable brand that provides 0W-20 synthetic meeting GF-5/API SN. Ensure the label clearly states API and ILSAC certifications and that it is suitable for gasoline engines like the 3.5L V6 in the TL.
After choosing the right oil, pair it with a compatible oil filter designed for the 3.5L V6 and replace the drain plug washer as needed to prevent leaks.
Maintenance and change intervals
Oil-change timing for the 2016 TL depends on driving conditions, but the vehicle’s maintenance minder provides guidance tailored to your usage. The following guidelines offer a general sense of timing.
- Normal driving: about every 5,000 to 7,500 miles or 6 to 12 months, whichever comes first
- Severe driving (short trips, stop-and-go urban driving, extreme temperatures): around every 3,000 to 5,000 miles
- Always refer to the owner's manual or maintenance minder for personalized timing
Adhering to the recommended intervals helps protect the engine, maintain performance, and preserve fuel efficiency.
Practical tips for changing oil
Before performing an oil change, gather the necessary tools, a new oil filter, and the correct oil quantity. Dispose of used oil responsibly and consider conferring with a technician if you are unsure about the process.
Summary
In brief, the 2016 Acura TL requires 0W-20 synthetic motor oil that meets ILSAC GF-5 and API SN specifications, with an approximate capacity of 4.5 quarts (with filter). Use the vehicle’s maintenance minder as a guide for oil changes, and always verify the level with the dipstick after adding oil. Following these guidelines helps protect the V6 engine and maintain optimal performance.
