Loading

How much to replace brake pads on acura tl?

The cost to replace the brake pads on an Acura TL can vary depending on several factors, but on average, you can expect to pay between $150 to $300 for the parts and labor. This includes the replacement of the front and rear brake pads, as well as any necessary adjustments or inspections.


Factors Affecting Brake Pad Replacement Cost


The exact cost to replace the brake pads on an Acura TL can be influenced by the following factors:



  • Type of Brake Pads: The cost of the brake pads themselves can range from $50 to $150 or more, depending on the quality and brand of the pads.

  • Labor Costs: The labor cost to replace the brake pads can range from $50 to $150, depending on the mechanic's hourly rate and the complexity of the job.

  • Additional Repairs: If the brake rotors or calipers also need to be replaced, the overall cost can increase significantly.

  • Location: The cost of parts and labor can vary depending on your geographic location and the local market rates.


It's important to note that regular brake pad maintenance is crucial for the safety and performance of your Acura TL. Neglecting to replace worn-out brake pads can lead to more expensive repairs down the line, such as the need to replace the brake rotors or calipers.


Replacing Brake Pads on an Acura TL


Replacing the brake pads on an Acura TL is a relatively straightforward task, but it's important to follow the proper procedures to ensure the job is done correctly. Here are the typical steps involved:



  1. Loosen the lug nuts on the wheels and remove the wheels.

  2. Inspect the brake pads and measure the thickness to determine if replacement is necessary.

  3. Disconnect the brake caliper and slide it out of the way, taking care not to damage the brake line.

  4. Remove the old brake pads and clean the caliper and rotor surfaces.

  5. Install the new brake pads, making sure they are properly seated and aligned.

  6. Reassemble the caliper and wheel, and tighten the lug nuts to the proper torque specification.

  7. Repeat the process for the remaining wheels.

  8. Perform a brake system check and test the new brake pads for proper operation.


If you're not comfortable performing the brake pad replacement yourself, it's recommended to have a qualified mechanic or auto repair shop handle the job to ensure the work is done safely and correctly.

How to tell if brake pads are bad?


These signs can include:

  1. Pulsation or vibrations in the brake pedal.
  2. Longer stopping distances.
  3. Your foot goes down further than normal when you apply the brakes.
  4. The vehicle pulling to one side when you brake.
  5. The brake pads look very thin, visually.



How much do dealers charge to change brakes?


The cost of replacing brake pads can vary depending on where the work is being done. Replacing brake pads at a dealership can be the most expensive option, with costs ranging from $500 to $1000 or more. Independent mechanics typically charge less, with prices ranging from $200 to $500.



How much should a brake pad job cost?


The average cost of parts is between $35 and $150. The average cost of labor is between $80 and $120 per axle. The average brake pad replacement total is between $115 and $300 per axle (parts + labor).



How much do dealerships charge for brake pads?


Replacing brake pads at a dealership can be the most expensive option, with costs ranging from $500 to $1000 or more. Independent mechanics typically charge less, with prices ranging from $200 to $500.



Is it OK to just replace brake pads?


Changing only the front or rear brake pads at a time can cause issues with braking performance. The new pads will grip the rotor more effectively than the worn pads, potentially causing unstable and unsafe braking. Additionally, the imbalance can overburden the brake pads, causing them to wear out even faster.



How much does it cost to replace all 4 brake pads?


The average front brake pad replacement cost is between $115 and $300; this is about the same as the cost of rear brake pad replacement. The cost of replacing all four brake pads, including parts and labor, ranges between $230 and $600 for all four wheels.



How much do Acura brake pads cost?


Acura Front Brake Pads Price
Typically the cost for parts will range from $100-$200 per axle and labor can cost anywhere between $80 - $100.



How much does it cost to replace brakes on an Acura TL?


The average cost for an Acura TL Brake Caliper Replacement is between $754 and $788. Labor costs are estimated between $130 and $164 while parts are typically priced around $623. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.



How long do Acura brake pads last?


30,000-40,000 miles
For the most part, however, brakes will last 30,000-40,000 miles. If you do a lot of cruising, brake pads can last longer, perhaps up to 60,000 miles. Front brake pads will typically wear down sooner, because they handle the weight that shifts to the front when pressing the brake pedal.



How long do Acura brakes last?


30,000-40,000 miles
For the most part, however, brakes will last 30,000-40,000 miles.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.