How much transmission fluid does a 2006 Chevy 2500 hold?
The 2006 Chevy 2500 pickup truck holds approximately 6 quarts of transmission fluid. This is the standard capacity for the automatic transmission in this model year and vehicle configuration.
Detailed Explanation
The 2006 Chevy 2500 is a full-size pickup truck that was part of the Chevrolet Silverado line. This particular model year and trim level came equipped with a 4-speed automatic transmission as the standard gearbox option.
The transmission fluid capacity for the 4L80-E automatic transmission used in the 2006 Chevy 2500 is 6 quarts. This is the amount of fluid required to properly fill and service the transmission during routine maintenance or after a fluid change.
Checking and Changing Transmission Fluid
To check the transmission fluid level in a 2006 Chevy 2500, the vehicle should be parked on a level surface with the engine running and the transmission in Park. The dipstick should be removed and the fluid level inspected to ensure it is within the proper range.
When changing the transmission fluid, it is recommended to use the full 6 quarts of the specified fluid type, which is typically a Dexron-VI or similar high-quality automatic transmission fluid. Proper fluid maintenance is crucial for the longevity and performance of the transmission in a 2006 Chevy 2500.
How many quarts does a 2006 Chevy Silverado transmission take?
For Automatic Transmission: 4L60-E....AF6
| Capacity: | 4 speed 4L60-E Total Fill 11.2 quarts. |
|---|---|
| Capacity: | 5 quarts Initial Fill. |
How much transmission fluid does a 2006 Chevy Silverado 2500hd Duramax hold?
Automatic Transmission Fluid
7.4 quarts Initial Fill. DO NOT drain the fluid if only the transmission spin-on oil filter is being replaced. Capacity: 6 speed 1000 Total Fill 12.7 quarts.
How many quarts of transmission fluid does a 6.6 Duramax take?
Duramax Fluid Capacities
| Year | Engine | Capacity |
|---|---|---|
| 2007.5-2010 | 6.6L Duramax LMM | 3.17 quarts |
| 2007.5-2010 | 6.6L Duramax LMM | 25.4 quarts |
| 2011-2016 | 6.6L Duramax LML | 10 quarts |
| 2011-2016 | 6.6L Duramax LML | 7.4 quarts |
How much transmission fluid does a Chevy 2500HD Allison hold?
3000 Series
| Allison Transmission Lubricant Capacities | |
|---|---|
| Transmission Model | Fill Capacity:qt (L)* |
| 2100/2200/2500 Series (shallow sump) | 13 (12) |
| 3000 Series (4 inch sump) | 29 (27) |
| 3000 Series (2 inch sump) | 26 (25) |
How many quarts does a Chevy 2500 HD take?
8 quarts
Oil Grade: SEOC3
| Viscosity: | 0W-30 (Below -29°C) 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 8 quarts (with filter). After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) Replace drain plug seal. |
How much transmission fluid does a 2006 Chevy 2500 HD hold?
Automatic Transmission Fluid
7.4 quarts Initial Fill. DO NOT drain the fluid if only the transmission spin-on oil filter is being replaced. Capacity: 6 speed 1000 Total Fill 12.7 quarts.
How much fluid does a 2006 4l80e hold?
4L80-E: 13.5 quarts. 4L85-E: 13.5 quarts.
What kind of transmission fluid does a 2006 Chevy 4L80E take?
Transmission Fluid
| Manufacturer | Transmission Type | Transmission Fluid |
|---|---|---|
| CHEVROLET | 4L80E | DEXRON VI |
| ISUZU | 4L80E | DEXRON III |
| JAGUAR | 4L80E | DEXRON III |
| ROLLS ROYCE | 4L80E | DEXRON III |
How many gallons does a 2006 Chevy 2500 hold?
26.0 gal
Fuel & MPG
0/0 mi. 26.0 gal.
What kind of transmission is in the 2006 Chevy Silverado 2500hd?
Quick Specs
Transmission Transmission, 5-speed manual, with overdrive (Requires (LQ4) Engine, Vortec 6000 V8 SFI and (AE7) Seats, front 40/20/40 split-bench.)
