How much transmission fluid does a 2009 Chevy Silverado hold?
The 2009 Chevy Silverado has a transmission fluid capacity of 4 quarts. This is the standard amount of transmission fluid required for the automatic transmission in this model year of the Silverado pickup truck.
Detailed Information on the 2009 Chevy Silverado Transmission Fluid
The 2009 Chevy Silverado is equipped with a 4L60-E 4-speed automatic transmission. This transmission requires 4 quarts of Dexron-VI or equivalent automatic transmission fluid to be filled to the proper level.
It's important to use the correct type and amount of transmission fluid to ensure the proper functioning and longevity of the transmission. Using the wrong fluid or overfilling the transmission can lead to issues such as slipping, hard shifting, or even transmission failure.
Checking and Changing the Transmission Fluid
- The transmission fluid level should be checked with the vehicle on a level surface and the engine running.
- To check the fluid level, locate the transmission dipstick and remove it, then wipe it clean and reinsert it fully before removing it again to read the level.
- If the fluid level is low, add the recommended type of transmission fluid in small increments until the level is correct.
- The transmission fluid should be changed periodically, typically every 30,000 to 60,000 miles, as specified in the owner's manual.
Properly maintaining the transmission fluid is crucial for the smooth and reliable operation of the 2009 Chevy Silverado's transmission. Following the manufacturer's recommendations for fluid type and change intervals will help ensure the longevity of this important component.
How many quarts of transmission fluid does a 5.3 Chevy Silverado take?
For Automatic Transmission: 6L80....AF6
| Capacity: | 6 quarts Initial Fill. |
|---|---|
| Capacity: | 6 speed Light Duty 6L80 Total Fill 12.2 quarts. |
| Capacity: | 6 speed Heavy Duty 6L80 Total Fill 12.4 quarts. |
How many quarts does a 2009 5.3 Silverado take?
6 quarts
Capacity: 6 quarts (with filter). After refill check oil level.
Do you leave the car running when adding transmission fluid?
Your car's engine should be running when you add fluid to the transmission, but you should have the transmission in park and the handbrake activated for safety. Check the owner's manual for instructions on selecting the correct transmission fluid for your vehicle.
How many quarts of transmission fluid does it take to fill a 4L60E?
For a new installation, the transmission typically requires approximately 12 quarts of transmission fluid. However, if it's simply a fluid change, a 4L60E usually requires around 5 quarts of fluid as some fluid will remain in the transmission even after draining.
How much transmission fluid does a 2008 Chevy Silverado take?
Automatic Transmission Fluid
Capacity: 6 quarts Initial Fill.
How many quarts does a Chevy transmission hold?
Total Fill 12.2 quarts. Capacity:6 speed With HD Cool 6L80 Total Fill 12.4 quarts. Initial fill would be all it takes when doing the drain and filter change right?
How many quarts does a Chevy Silverado transmission take?
Automatic transmissions: 4L60-E: 11.2 quarts.
What happens if you overfill transmission fluid?
Excessive fluid prohibits proper lubrication and cooling and slows the rotating crankshaft, similar to the effect of running through water. When the air above mixes with the high levels of fluid, it creates a foamy substance that saturates the transmission. This can lead to: Part pitting.
How many quarts of transmission fluid do I need for a change?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
Is 4 quarts enough transmission fluid?
You might need 3 to 5 quarts of fluid for a standard automatic transmission car. -Suvs or trucks may need 5 to 7 quarts or more.
