How much transmission fluid does a Toyota Corolla need?
The typical answer is that most modern Corollas with a CVT require about 7 quarts (around 6.6 liters) for a full transmission fluid replacement, while a simple pan drain and refill usually needs about 4.5–5.5 quarts (roughly 4.3–5.2 liters). Exact amounts depend on model year and transmission type.
This article explains how fluid capacity varies across Corolla configurations, including CVT, hybrid e-CVT, and older automatic transmissions, and provides guidance on how to determine the precise quantity for your specific car.
Transmission configurations in the Corolla
Corollas have moved from traditional automatics to advanced continuously variable transmissions (CVTs). Today, most non-hybrid models use a direct-shift CVT, while hybrids use an electronically controlled CVT (e-CVT). Some very early generations used conventional automatic transmissions. Always verify the exact specification for your year and trim.
- CVT (Direct Shift CVT) in most current non-hybrid Corollas: full replacement capacity about 7.0–7.5 quarts (6.6–7.1 liters); drain-and-fill approximately 4.5–5.5 quarts (4.3–5.2 liters).
- Hybrid Corolla (e-CVT): typical full replacement in the same broad range as CVTs (roughly 6.5–7.5 quarts / 6.2–7.1 liters); drain-and-fill around 4.5–5.5 quarts (4.3–5.2 liters).
- Older Corolla automatics (present in earlier generations): about 9–10 quarts (8.5–9.5 liters) for a full replacement; drain-and-fill generally 6–7 quarts (5.7–6.6 liters).
In practice, most current Corollas rely on CVTs, so planning around 7 quarts for a full change and roughly 4.5–5.5 quarts for a standard drain-and-fill covers common service scenarios. Always confirm with your specific model year.
Service scenarios and how much to buy
Fluid capacity varies by whether you’re draining the pan and refilling or performing a full system replacement/flush. Use the following as a practical guide, keeping in mind that exact numbers depend on the transmission type and year.
- CVT drain-and-fill (pan only): about 4.5–5.5 quarts (4.3–5.2 liters).
- CVT full replacement or professional flush: about 7.0–7.5 quarts (6.6–7.1 liters).
- Hybrid Corolla (e-CVT) full replacement: about 6.5–7.5 quarts (6.2–7.1 liters).
- Older conventional automatic (rare in recent models): drain-and-fill around 6–7 quarts; full replacement around 9–10 quarts (8.5–9.5 liters).
Notes: Use the manufacturer-recommended transmission fluid type (for Toyotas, often Toyota CVT Fluid Type IV for CVTs) and follow the service manual’s filling procedures. Do not mix different fluid types, and consult your owner’s manual or a Toyota dealer for the exact capacity for your vehicle.
How to determine the exact capacity for your car
Because capacities vary by year, engine code, and transmission revision, check these reliable sources to get the precise number for your Corolla:
- Your owner’s manual or a Toyota service manual for your model year.
- Official Toyota dealership service data or Bulletin (TIS) for the exact transmission specification.
- Ask a qualified technician at a Toyota service center if you’re unsure.
Having the exact figure helps prevent overfilling or underfilling, which can affect transmission performance and longevity.
Summary
For most modern Toyota Corollas with CVTs, plan on about 7 quarts for a complete fluid change and around 4.5–5.5 quarts for a simple drain-and-fill. Hybrid versions use the same general range, while older automatic transmissions require more fluid overall. Always verify the precise capacity for your specific year and transmission type in the owner’s manual or with a Toyota dealer, and use the recommended CVT fluid type. Regular, correct fluid service is key to preserving transmission reliability in a Corolla.
How much transmission fluid does a 2003 Toyota Corolla need?
For Automatic Transmission: A245E....TIV
| Capacity: | 3.2 quarts Initial Fill. |
|---|---|
| Capacity: | 4 speed A245E Total Fill 7.7 quarts. |
How many quarts of transmission fluid does a 2005 Toyota Corolla take?
Automatic Transmission Fluid
3.2 quarts Initial Fill.
How many quarts drain and fill transmission fluid?
It's around 3 Qt.... You may want to measure what you drain to get in the ballpark for refill.also be sure you can get the filler plug out before starting the job. ~3.5-3.75, I fill to the very top of the full range. Mine takes 4.5...the trans cooler holds an extra quart.
How many quarts of transmission fluid does a 2010 Toyota Corolla take?
3.1 quarts Initial Fill. Capacity: 4 speed U341E Total Fill 6.9 quarts.
